Will this work.. P8Z68/Hyper 212 Plus/Memory

[Crush3d]

Hey guys,

This may be slightly off topic as I am not planning on overclocking my computer yet, but I figured this section was most appropriate for my question!

I'm building a gaming computer and I was wondering if I would have conflicts now or in the future in terms of space..

I'm planning on getting the following parts

Motherboard
ASUS P8Z68-V PRO/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131790

Fan
COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long Life Sleeve 120mm CPU Cooler Compatible Intel Core i5 & Intel Core i7
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103065
-or-
GELID Solutions CC-GX7-01-A 120mm Nanoflux Bearing CPU Cooler
http://www.newegg.com/Product/Product.aspx?Item=N82E16835426030

My primary question is whether or not a 120mm fan will interfere with my Memory on that motherboard if I were to put 4 sticks with heat sinks on them in there.. for example..

CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ16GX3M4A1600C9B
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347

I've read that some people have conflicts while others do not depending on this or that. Without actually having seen any of these parts personally I was hoping that someone around would be able to verify whether or not that combination of 4xMemory/CPU Fan would cause any kind of issue with one another in terms of space. If you need any more information don't hesitate to ask.

I appreciate your time, thanks!

 

[sosofm]

Buy this memory http://www.newegg.com/Product/Product.aspx?Item=N82E16820233197 and COOLERMASTER Hyper 212 and you will not have any problem because the RAM is low profile

 

[Crush3d]

This is my first computer build.. A lot of the memory that I have seen has the "teeth" on top of it as a method of cooling (apparently). Will getting low profile memory that does not have this feature have a heating issue? I won't be overclocking immediately after I build the system, however I would like have that option open in the future. I'm not sure if that makes a difference.

Thanks!

 

[mcnumpty23]

the corsair low profile will be fine

its the cpu you will be overclocking as memory speed over 1600mhz doesnt really make much difference on that

platform anyway

 

[Crush3d]

Buy this memory http://www.newegg.com/Product/Product.aspx?Item=N82E16820233197 and COOLERMASTER Hyper 212 and you will not have any problem because the RAM is low profile

Will this ram work with my selected motherboard?

When you look at the details for the motherboard on newegg (see the link below) it says..
"Channel Supported: Dual Channel"

However, this memory says it is quad channel.. does this matter?



Motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131790

Memory:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820233197

 

[mcnumpty23]

no it doesnt matter because you are using 4 modules so its basically dual channel twice

what it means is you shouldnt use 1 or 3 modules only even amounts of modules

 

[davcon]

Buy a low profile kit and you'll have no issues with heatsink install.
Take your pic.= exactly the same performance as the kit you linked sans fins.
http://www.newegg.com/Product/Productcompare.aspx?Submit=ENE&N=100007611%2050001459%20600006127&IsNodeId=1&bop=And&CompareItemList=147%7C20-233-198%5E20-233-198-TS%2C20-233-197%5E20-233-197-TS

 

[Crush3d]

Best answer selected by Crush3d.

 

[cliffro]

Will this ram work with my selected motherboard?

When you look at the details for the motherboard on newegg (see the link below) it says..
"Channel Supported: Dual Channel"

However, this memory says it is quad channel.. does this matter?



Motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131790

Memory:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820233197

It will work for either actually.

 

[Mousemonkey]

This topic has been closed by Mousemonkey