Intel Auto-tune
Last response: in Overclocking
The motherboard is a DP67BG.
The problem I'm having with overclocking, is that when it boots properly, there seems to be no actual effect.
If I set the settings to something unstable, the system fails to boot, as you would expect. However, when the system does boot, testing the cpu yields the same results as it did before making any changes.
The CPU under load performs at 3.39ghz. Change the settings too high, system fails to boot. But changing them to seemingly acceptable levels, and the system doesn't change.
Right now, I have the multipliers for all cores set to 37 (with the default clock of 100mhz), but the system is still performing at the 3.39ghz it started at.
Other than failing to boot when bad settings are given, and failing to boot at all during autotuning, there seem to be no other issues with the system.
It runs at 26c idle, and 45-50c under full load, has never gone over 54c.
This is a SS of the autotune log, it mentions a warning about a system hang, presumably the couple of hours I let it sit there wondering if that was normal.
![]()
Any help or advice is appreciated.
The problem I'm having with overclocking, is that when it boots properly, there seems to be no actual effect.
If I set the settings to something unstable, the system fails to boot, as you would expect. However, when the system does boot, testing the cpu yields the same results as it did before making any changes.
The CPU under load performs at 3.39ghz. Change the settings too high, system fails to boot. But changing them to seemingly acceptable levels, and the system doesn't change.
Right now, I have the multipliers for all cores set to 37 (with the default clock of 100mhz), but the system is still performing at the 3.39ghz it started at.
Other than failing to boot when bad settings are given, and failing to boot at all during autotuning, there seem to be no other issues with the system.
It runs at 26c idle, and 45-50c under full load, has never gone over 54c.
This is a SS of the autotune log, it mentions a warning about a system hang, presumably the couple of hours I let it sit there wondering if that was normal.
Any help or advice is appreciated.
More about : intel auto tune
Ok, so I'm still trying to get this to work, but I'm pretty sure I know what's happening now.
As you can see above, the default turboboost multiplier for when all 4 cores are active, is 34, and is higher for less cores being used.
I downloaded the intel turboboost monitor widget, with it I can see the speed spike up to 3.7ghz as the pc loads, but then once all 4 cores are active, it goes down to 34.
So the system appears to be running at the default turboboost settings, the problem is those aren't the current settings.
Either looking at the settings in bios, or on this program, it shows the multipliers set to 3.8 for all cores.
So the mobo pretty much seems to just be ignoring my changes all together.
wth?
As you can see above, the default turboboost multiplier for when all 4 cores are active, is 34, and is higher for less cores being used.
I downloaded the intel turboboost monitor widget, with it I can see the speed spike up to 3.7ghz as the pc loads, but then once all 4 cores are active, it goes down to 34.
So the system appears to be running at the default turboboost settings, the problem is those aren't the current settings.
Either looking at the settings in bios, or on this program, it shows the multipliers set to 3.8 for all cores.
So the mobo pretty much seems to just be ignoring my changes all together.
wth?
Related ressources:
- ForumWhere is my Catalyst Autotune ?
- ForumWhy Video Encoding takes longer On Intel I7 than I5?
- ForumIntel BOXDP67BGB3 OC settings seem to do nothing..
- ForumWhat is the best/fastest memory for my intel i72600k?
- ForumIntel Burn & Prime95 i5 2500k
- ForumIntel i5 2500k and required cooling - please help.
- ForumNew Intel Sandy Bridge benchmarks and overclocking results! 4.7Ghz!!!
- ForumAnother AntiTrust case against Intel
- ForumIntel Intros 3-Series Chipsets with FSB1333 and DDR3
- ForumSabertooth z77 good for OC'ing (Help noob!!)
- ForumLooking for suggestions
- ForumIs this heat normal? Gigabyte z77 ud5h I7 3770k 4.7 ghz 1.275v
- ForumPossible to overclock my Dell?
- Forum2500K no longer as capable
- ForumAre there pulsatile pumps?
- ForumIntel BOXDP67BGB3 OC settings seem to do nothing..
- ForumIntel 2 Quad Q6600
- ForumAMD Quad Core A6-3400M vs Intel Core i3-2330M
- ForumOVERCLOCKING intel 2.0ghz E4400 CPU
- Forum[Solved] Intel RTS2011LC Liquid Cooler
- More resources
Read discussions in other Overclocking categories
!
