DDR3 1333 unganged mode

Hi..

POST shows my memory as DDR* 1333 unganged mode.

Below are the details of my memory and MB.

Memory: Corsair XMS3 Dominator 4GB 2-Kit Phenom II DDR3 1600MHz CL8
Motherboard: ATX, AMD890GX, 5200 MT/s, AM3, 4xDDR3(1866)/1333/1066MHz, PCI-E V2.0, G-LAN, SATA3.0, SATA-RAID 0/1/5/0+1, 2xPCI-E x16 (16x, 8x), VGA onboard, DVI-D, HDMI, FireWire, USB3.0

Does the MB supports 1600 ?
5 answers Last reply
More about ddr3 1333 unganged mode
  1. 1333 is the default speed for most AMD MOBOs anything over that needs to be set in the BIOS manually by adjusting the settings.
  2. ok... so there is no problem if i set it manually, i hope...
  3. The website of gigabyte says that like this.

    http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=3342

    Memory

    1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
    2. Dual channel memory architecture
    3. Support for DDR3 1866(OC)/1333/1066 MHz memory modules
    4. Support for non-ECC memory modules
  4. subinjose said:


    ON that link click on the Memory Support list and you will see a list of the various modules that they have tested on the MOBO and many of them are DDR3 1600--- so it should be fine !!
  5. I've changed the speed to 1600. It seems to be ok..
Ask a new question

Read More

Memory DDR3