Sign in with
Sign up | Sign in
Your question

Haf 932 case flow

Last response: in Overclocking
Share
February 21, 2012 10:10:07 AM

Was it good idea have both rads intake, do I need more case fans?

More about : haf 932 case flow

February 21, 2012 11:51:09 AM

Never cared much for side fans. Ideal airflow is from bottom front to rear and top rear.

Don't really know much about watercooler of that type.
a c 325 K Overclocking
February 21, 2012 3:24:38 PM

Airflow is looking OK, but I assume you are going to put an exhaust 120 on the back and possibly 1-2 on top? You currently have a lot of positive flow, zero negative.

Remember that your airflow in over your rads will be slowed down quite a bit, so don't assume you need to match 1:1 on intake fans and exhaust. You'd rather have neutral airflow or negative flow, if possible.
Related resources
February 21, 2012 4:57:07 PM

rubix_1011 said:
Airflow is looking OK, but I assume you are going to put an exhaust 120 on the back and possibly 1-2 on top? You currently have a lot of positive flow, zero negative.

Remember that your airflow in over your rads will be slowed down quite a bit, so don't assume you need to match 1:1 on intake fans and exhaust. You'd rather have neutral airflow or negative flow, if possible.


thanks alot this post help me alot.

yeah I aiming for a low noise computer, I tested just fans and made sure they have low noise, they also push wery little air.

I will have 2 weak 500rpm one exhaust rear and one in top.
Currently the rear is intake but I think I will make it exhaust.



a c 325 K Overclocking
February 21, 2012 5:13:05 PM

That's a lot of radiator space for a CPU only loop.

Edit: read your other thread that there will be GPUs. My mistake.
!