Sign in with
Sign up | Sign in
Your question

Hyper-X ddr2 (2gb) 1066 showing as 800

Last response: in Memory
Share
April 24, 2010 6:40:17 PM

does anyone knows why my mem is showing as 800 mhz and @5-5-5-18 in place of 5-5-5-15?
could it be my mb?
it is an ASUS m4a785-m it doesnt support MY model but it does support the kit of 2(2gb) and also 2(4gb)
my model : khx8500d2/2g(b)
the others khx8500d2k2/2g(b)
and khx8500d2k2/4g(b)
a b } Memory
April 24, 2010 6:57:07 PM

The mobo is just reading the SPD.
Enter bios and set the parametres manually (look at your mobo manual).
April 24, 2010 7:07:41 PM

will my warranty remain?
Related resources
a b } Memory
April 24, 2010 7:18:25 PM

Of course. It's a very simple operation. Just follow the instructions of the manual. You must set the memory frecuency, the latencies and the voltage (if necessary).
If you need more help, just tell me your mobo model.
April 25, 2010 12:07:56 PM

if i set it mannualy my windows wont boot
a b } Memory
April 25, 2010 2:11:09 PM

This is what you have to do:
1)Enter bios
2)Go to "advanced" menu
3)Go to "jumper free configuration"
4)"memory clock mode" set in /manual/.
5) "memclock value" select /533/
6) "DRAM timing mode" select /both/
7) tcl=5, trcd=5, trp=5, tras=15
8) "memory over voltage" -> set the voltage that is print in your modules (2,2V)
http://www.valueram.com/datasheets/KHX8500D2_2G.pdf
http://www.valueram.com/datasheets/KHX8500D2K2_2G.pdf
9) f10, save the changes.
April 25, 2010 4:57:59 PM

thank you
!