I have some problems with my pc.
When I boot, my pc gives a voltage/temp warning.
As i cheked my voltage, i saw they where a little bit to high:
I hope you guys know what the problem is.
Whatever you're using to read voltages is giving bad readings.
At 4.16v your chip would pop.
Have a look in the bios hardware monitor for the Vcore, and, if you can, use a DMM to check the other voltages directly from the psu.
Which Operating System are using? In addition download and install "Hardware Monitor" by CPUID. Its one of the best, let it read your Vcore. Your false readings might also be corrected if you update/flash your motherboards BIOS.