Tom's Hardware > Forum > Graphic & Displays > Graphics Cards > P5Q Pro w/ new card = no boot

P5Q Pro w/ new card = no boot

Forum Graphic & Displays : Graphics Cards - P5Q Pro w/ new card = no boot

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

I just bought a EVGA GTX275 to replace my 8800GTS 512. Install went smooth but computer does not post.

The motherboard's green light is on but I don't hear a beep like I used to.

I also tried unplugging all the accessories like HDD, DVD-ROM etc and only run CPU/Ram/Video and im still getting the same results.

For power I have an Antec 550W, which is the min requirement for the card and everything checked out even with the PSU calculator.

Anyone have any ideas?

Add a reply

If you put the old card back in, does the computer post then? Just want to check that nothing else got messed up in the process. When I got a bad card, it was a nice bit of evidence that with the old card it would post and the new it would not. Even if the Antec was on the low side, I'd imagine it would at least post, then crash later.

------------------------------ New Build (Under Contruction): Intel Core i5 750 > Gigabyte GA-P55-UD4P > 2x2GB GSkill 1600MHz CL7 1.65V > Samsung Spinpoint F3 1TB > Antec 300 Illusion > Asus 4850 512MB w/AM Cooler > Corsair 650HX > Hyper 212 Plus > See other Builds in Member Config
Reply to EXT64

I gave it to my friend, I guess I'll get it back from him and try that out.

Reply to Terenus

Ask the community Add a reply

Tom's Hardware > Forum > Graphic & Displays > Graphics Cards > P5Q Pro w/ new card = no boot

Go to:

Help |
Forum rules

There are 967 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.306 seconds

Focus On

P5Q Pro w/ new card = no boot

Forum Graphic & Displays : Graphics Cards - P5Q Pro w/ new card = no boot