Primary drive 1 not found Tags: Storage Last response: October 13, 2011 8:31 PM in Storage Share jons4aces September 30, 2011 8:19:17 PM dell 4600/2.4/ 4g Ram dimension, 2 HD, WD Caviar 500 & Seagate 280 2 dvd burners, all worked fine til I tried to add a new Hd and ended up booting to the following screen: PHOENIX ROM BIOS PLUS VERSION 1.10 A12 SECONDARY DRIVE 0 NOT FOUND SECONDARY DRIVE 1 NOT FOUND Strike F1 to continue, Strike F2 for setup utility. No matter what I change, cant get it to boot Now I cant remember the exact settings prior to changing any settings. Is there a reset please ... help! More about : primary drive found kikzmachine October 13, 2011 8:31:09 PM You might want to check if the new drive you are adding are configured to be a slave drive, you cannot put 2 HD configured to be a master in one cable. Check the link below for steps on how to set a drive as a slave drive. http://www.dtidata.com/resourcecenter/2007/04/23/how-to... To reset your BIOS settings, look for an option that reads, Load Setup Default. m 0 l Can't find your answer ? Ask ! Publish Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !