How to make a pata drive 0 Tags: Hard Drives Controller How To Storage Last response: October 3, 2011 2:50 PM in Storage Share lradams244 October 3, 2011 2:44:43 PM Hello, My Sata drive died and would like to use a IDE drive connected to my pata controller but how do I change the pata drive to drive 0 More about : make pata drive canadian69 a b G Storage October 3, 2011 2:50:03 PM Get into your BIOS and change the boot order. Can't find your answer ? Ask ! Publish Related resources: ForumWindows 7 does not recognise PATA drive ForumHow to make PATA HDD to usb ForumPATA Hard Drive on P965 motherboard ForumAnyone make a 10,000 rpm PATA drive ? ForumHow to Ghost from IDE 0 master and make SATA drive C:? Forumhow to boot from SATA disk instead of PATA one ForumHow to speed up PATA hard drive windows 7 Forum[solved] silent data corruption on PATA USB enclosure ForumAdding second HDD to old machine with both PATA and SATA connections ForumOptical Drives and SATA (and PATA ) Saturation ForumOptical Drives (CD/DVD/Blu-Ray) and SATA (and PATA ) Saturation ForumIs ( PATA ) ATA 100 slower than (IDE) ATA 133 ForumSATA subanstially slower than PATA ForumSATA or PATA or BOTH!? ForumPATA to SATA upgrade advice Forum8400 HDD/DVDROM Configuration on PATA ForumFirst SSD advice? ForumCannot access or format External Hard Drive (WD My Book Essential) Forum37 25 GB unallocated on a 1TB external hard drive Forum[Solved] DVD-ROM drive works one day, not the next. More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !