/ Sign-up
Your question

After Changing RAID settings in the CMOS there is no screen output

  • Chipsets
  • NAS / RAID
  • CMOS
  • Motherboards
Last response: in Motherboards
a b V Motherboard
May 12, 2010 9:01:54 AM

The issue is I have just bought a gigabyte p55m-ud2 motherboard. It was fine to start with I could boot into the CMOS. However after changing the RAID setting under>Standard CMOS Features> Peripheral Devices it no longer displays anything when I start it up. Everything runs, all the fans go, all the indicator leds are on but nothing on the screen. And I checked the monitor to make sure it was working. Any help is much appreciated. :) 

More about : changing raid settings cmos screen output

a c 436 V Motherboard
May 12, 2010 10:10:19 AM

Use the cmos jumper to reset the bios. Unplug the power supply and move the jumper over one position so that 2 out of 3 pins remain covered, then return to it's original position after one minute. Or remove the board battery.