valsorim

Distinguished
Oct 5, 2009
19
0
18,510
I need a motherboard for my new I7 920 build and prefer Asus, Gigabyte and EVGA.

Cost is an issue and I need a mobo with following in mind:

1. I would like to overclock the 920 to approximately 3.6/3.8 ghz.

2. I will start with one ati 5850 card and will purchase another one later for crossfire when prices drop. Several Newegg reviews mentioned that some motherboards don't have enough space between cards so i definitely need a mobo with enough space if you think that is really important.
Moreover, the motherboard needs to have 2 pci express x16 slots, many evga mobo's don't.
 

valsorim

Distinguished
Oct 5, 2009
19
0
18,510
I would like to stick with either asus, gigabyte or evga.

What is the difference between different P6T's?

They all seem to have at least 2 pci express x16 slots. Do they all have enough space for two 5850's?

Are there any BIOS differences or are there any other disadvantages with regards overclocking an 920 to 3.6/3.8 ghz?

Will a Scythe MUGEN 2 cooler interfere with their design or do you recommend another cooler with better quiet/performance ratio?


I am looking at the following P6T motherboards:

ASUS P6T SE LGA
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131386

ASUS P6T LGA
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131359

ASUS P6TD Deluxe LGA
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131403

ASUS P6T Deluxe V2
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131365


In addition, the same questions apply to the other boards i looked at:


EVGA 141-BL-E757-TR LGA
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131365

EVGA E758-TR 3-Way SLI
http://www.newegg.com/Product/Product.aspx?Item=N82E16813188046

EVGA E758-A1 3-Way SLI
http://www.newegg.com/Product/Product.aspx?Item=N82E16813188039

GIGABYTE GA-EX58-UD3R
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128375

GIGABYTE GA-EX58-UD5
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128362


Again, please keep in in mind that cost is an issue but i am willing to cut corners if is worth it and there is a valid reason.

All suggestions are welcome.

Thanks