Sign in with
Sign up | Sign in
Your question

Memory Management BSOD

Last response: in Memory
May 19, 2010 9:38:15 PM

I have had some BSOD errors with my build but it has been about 1.5 yrs since that. I recently have been getting some - all Memory Management but most recently a Bad Pool Caller error.

RAM is running at 5-5-5-18 which is looser timings than they can run at and at 2.0v so that is good. I originally thought and errors pointed towards Ram problems. Well they said during one test you are expected to get errors and unless I get a ton of errors than the ram is fine and may be something else.

MB GIGABYTE GA-P35-DS3L LGA 775 Intel P35 ATX All Solid Capacitor Intel
Memory is Crucial BL12864AA80A.8FE5

I ran memtest on each stick for 8+ hrs. Found out one stick got some errors. I was ready to RMA it. Well came back home and my g/f had cleaned up a bit and moved the sticks a bit so I was unsure which was the bad one. So I memtested them again 10+hrs and got no errors. I had no BSODs for i'd say a few weeks and now just got one.

Here is my latest minudump


More about : memory management bsod

May 28, 2010 6:49:24 PM

Any thoughts. Memtested each stick 15+ hrs and no errors.