Sign in with
Sign up | Sign in
Your question

Prime95 BSOD

Last response: in Overclocking
April 14, 2012 3:42:22 AM

So i recently overclocked my amd 1075t to 3.8ghz and i decided to stress test it with prime95's torture test (blend preset). after about a minute into the test i saw some errors to appear on screen which was then followed by a BSOD. I was also monitoring my temp in cpu-z; however, according to cpu-z my cpu temps never exceeded 35 degrees Celsius which is making feel that it's isn't detecting my temps correctly because those temps seem a bit too low (Corsair H60 is my cooler). I also have my ram slightly overclocked to 1449 from 1333mhz and the northbridge is also slightly overclocked at 2149 (i think) could that have caused my BSOD? or maybe i should try to increase the voltage?

AMD 1075t
Corsair H60
4 2gb ram sticks at 1333
crucial m4 64gb
western digital green 1.5tb
amd radeon 6770
gigabyte 990fxa ud3
corsair tx650m

Edit: this may be use useful.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002FB70E0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

More about : prime95 bsod

a c 283 à CPUs
a b À AMD
a c 110 K Overclocking
April 14, 2012 4:17:25 AM

Yeah, increasing the voltage should fix it, and if those temps are correct, then you have a lot of headroom for that anyway.

Edit: Try RealTemp or Core Temp just to be sure on the temps.
a c 139 à CPUs
a b À AMD
a c 242 K Overclocking
April 14, 2012 7:39:59 AM

Just go back default it will solved problem :D  and higher/lower voltage of RAM and CPU can cause that problem. Also ram timing need ajusting.
a b à CPUs
a b K Overclocking
April 15, 2012 5:17:03 PM

If your RAM is rated for 1333mhz it wont work at 1499, you need to downspeed your RAM for that overclock to work.