No System Warning Speaker Connectors? 4th bolt on CPU fan wont fit?

Artinz

Distinguished
Nov 24, 2009
9
0
18,510
Hi, I am currently building my new system, and I have run into two problems. Currently, I am building it on an Asus P6T deluxe V2, and one issue is that on my Cooler Master HAF 922 Case, there seems to not be any type of connector for a System warning speaker. I know that there is usually a 4-pin one, but there is nothing. Also, my Cooler Master V8 cpu cooler seems to be having problems. As I was screwing on the backplate, I couldn't get the 4th bolt on, the screw seemed to be too short. Can I just use the 3?
 
Solution
A lot of cases don't come with a system speaker anymore. Yes, your motherboard has the pins to power a system speaker. The speaker pins are by the front-panel pins. You just need to buy a system speaker. You can get one for cheap from here:

http://www.cwc-group.com/casp.html

You need to go back to the cooler instructions if you can't get the cooler properly installed. No, you can't just use 3 of the bolts.
A lot of cases don't come with a system speaker anymore. Yes, your motherboard has the pins to power a system speaker. The speaker pins are by the front-panel pins. You just need to buy a system speaker. You can get one for cheap from here:

http://www.cwc-group.com/casp.html

You need to go back to the cooler instructions if you can't get the cooler properly installed. No, you can't just use 3 of the bolts.
 
Solution