What barbs for mcw 60

[expat]

Hi,
i have a hd 5870 water cooled with a swiftech mcw 60 waterblock,
The problem i have is it housed in a cosmos s case and at the moment the pipework from the block fouls on the 200mm side fan of which i have removed.
What i would like to know which are the best 90 degree angled barbs to use for this particular waterblock.
I will say that there is a slight recess where the barbs go into the block so the
thread would have to be quite long.
thx in advance

 

[rubix_1011]

I am currently running two MCW60's- I've used nylon 90 degree barbs many times as well as normal, straight barbs. Are you looking for compression fittings or barbs?

I'm currently using some of these:

http://www.performance-pcs.com/cata...oduct_info&cPath=59_346_343&products_id=21262

 

[toolmaker_03]

http://www.frozencpu.com/products/10751/ex-tub-675/Bitspower_G14_Thread_90-Degree_Rotary_38_ID_x_12_OD_Compression_Fitting_-_Matte_Black_BP-MB90R2LCPF-CC2.html?tl=g30c409s1302
http://www.frozencpu.com/products/13559/ex-tub-957/Bitspower_G14_Female_to_Female_Extender_-_50mm_-_Matte_Black_BP-MBWP-C76.html?tl=g30c101s1354
http://www.frozencpu.com/products/10363/ex-tub-609/Bitspower_Dual_G14_Male_Male_Fitting_-_Matte_Black_BP-MBWP-C08.html?tl=g30c101s1354
I would use a setup with the three parts above to make a extended 90 degree angle off the video card block, if needed you could use 2 different size extenders to get the length just right.

 

[rubix_1011]

Might also find some clever ideas at the bottom of this page:

http://www.swiftech.com/mcw82vgawaterblock.aspx#tab4

 

[expat]

I am currently running two MCW60's- I've used nylon 90 degree barbs many times as well as normal, straight barbs. Are you looking for compression fittings or barbs?

I'm currently using some of these:

http://www.performance-pcs.com/cata...oduct_info&cPath=59_346_343&products_id=21262
http://www.performance-pcs.com/catalog/images/products/black_elbow_12_(14NPT).jpg

thx for all your replies guys i think i will go with rubixs suggestion as this will suit my need best
regards rob