Best case for a Gigabyte GA-X58A-UD5 or GA-X58A-UD7 mobo?

Hello,
I'm having a lot of trouble trying to find a good case (in regards to cooling, noise reduction, excellent dust filtering and pure awesomeness) for the GA-X58A series motherboard. Could someone provide feedback on some good cases please? Many thanks
8 answers Last reply
More about best case gigabyte x58a x58a mobo
  1. JackNaylorPE said:


    Thanks~ however, it doesn't have any usb 3.0 bays, is there one with usb 3.0 support? =P
  2. pc cases, motherboards, and devices with USB 3.0 ports are very very rare. Lian Li will introduce a pc case with USB 3.0 ports on March 26th:

    http://www.dvhardware.net/article40611.html

    Asus just came out with a motherboard that supports USB 3.0:

    http://www.thinkcomputers.org/asus-p7h55d-m-evo-intel-h55-matx-motherboard-review/2/

    It will be a while before USB 3.0 ports and devices become common. Here is a link to an excellent two page article about the transition from USB 2.0 to USB 3.0:

    http://arstechnica.com/hardware/guides/2009/08/super-speed-a-brief-history-of-usb-30.ars
  3. Thank you so much guys =) I'll have a read at what you guys have posted in the meantime.

    However, if you or anyone else have updates on this, please feel free to post a reply to this thread =P
  4. Hello,
    I'm having a lot of trouble trying to find a good case (in regards to cooling, noise reduction, excellent dust filtering and pure awesomeness) for the GA-X58A series motherboard. Could someone provide feedback on some good cases please? Many thanks


    genxdarkangel :

    I just finished a build with the Antec 900 and GAX58A-UD7 although it works it got very cramped very quickly. The drives stuckout from the HDD cage into the case which caused me to have to rearrange the setup due to the PSU connector on the header being in the way. My next build will surly include the Antec 1200 worth the extra $$...

    Ernie




    " class="img lazy">

    " class="img lazy">



  5. Hi, I would HIGHLY recommend the corsair obsidian 800d. Excellent all around, plus has a little bling (window). Not a very glitzy gamers type, but huge, cool and works well with my x58a-ud5 board. Best cable management I have seen! Hot swap bays, etc, etc. Wish I had the money to buy extras for other existing machines! No dissapointments here. Oh, almost forgot to mention only complaint. I have the corsair hx-1000 psu and the cable barely reached. Huge case though so not psu's fault. Youtube is a great place to see builds with it. Good luck.
  6. Hi,I think you should give a look at these cabinets, these are very good cabinets with many functionalities and I am sure they will furnish your requirements with fair rates.Zalman is providing very good cases.......The support E-ATX / Standard ATX / microATX.Which will handle your Gigabyte EX 58 series.






    http://www.zalman.com/ENG/product/Product_Read.asp?Idx=349
    http://www.zalman.com/ENG/product/Product_Read.asp?Idx=310
    http://www.zalman.com/ENG/product/Product_Read.asp?Idx=336
    http://www.zalman.com/ENG/product/Product_Read.asp?Idx=309




    try and feel it........lol
  7. Hi,I just find an another cabinet which support your motherboard with usb 3.0 ports also. It is Lian Li PC-A77F.The PC-A77F full tower chassis can support E-ATX, Micro-ATX, CEB or ATX motherboards.



    ^go to this thread: http://www.techenclave.com/dealers-paradise/lian-li-and-lancool-cabinets-146864.html u can order Lian Li cases there.
Ask a new question

Read More

Power Supplies Cases Cooling Gigabyte Components Product