Sign in with
Sign up | Sign in
Your question

RAID10 status initialize

Last response: in Storage
November 9, 2011 11:56:14 AM

I created RAID10 with 4 SAS HDD, the status was Normal in the RAID option ROM screen, but after I installed RedHat 6.1 with this volume and rebooted, I found the status was yellow Initialize text, not the green Normal text, is that anything bad? What does "Initialize" mean? and "rebuild"? Who can help me?
a c 82 G Storage
November 9, 2011 1:16:59 PM

It will be difficult to help if you don't provide info about the controller being used. If initialization completes, then it should be fine.