Sign in with
Sign up | Sign in
Your question

CM HAF 932 Top Fan Advice aka confusion

Last response: in Components
Share
February 18, 2010 11:06:08 AM

I have a confusion or may be I don't know that how to equip 120mm fan on the top of CM 932 along with 230mm fan ????

Do anyone knows this so plz help me and also tell me how to euip 120mm fan along with 230mm one on the top.

I know that lots of ppl have put 3x120mm fans in place of 230 mm one on the top but I want to put 1x120mm fan along with the 230mm one on the top

because in coolermaster official site it is stated as that we can put 120mm along with 230mm fan on the top.

Thank you all in advance
:) 
a c 248 ) Power supply
February 18, 2010 12:14:44 PM

I have a Coolermaster HAF 932. The extra 120mm fan can be mounted in the very front of the top panel. The bezel that sticks up at the front needs to be removed. Remove the square rubber pad to get to the mounting screws. Check the diagram in the case instructions.

Why do you want to install a fan at the top front of the case? Ventilation, airflow, and cooling with stock fans are excellent.
a b ) Power supply
February 18, 2010 1:53:43 PM

i think it would actually screw up ur airflow and give u higher temps...
Related resources
a c 248 ) Power supply
February 18, 2010 2:21:19 PM

It is an awkward location. Once the top bezel is put back into place the air flow for that extra fan is restricted. In addition, drives installed immediately below it restrict airflow too.
February 18, 2010 2:35:29 PM

ok now I understand everything, thanku guys
!