Sign-in / Sign-up
Your question

Asus P6T Deluxe V2 EATX Connector Help

Tags:
  • New Build
  • Asus
  • Systems
Last response: in Systems
December 12, 2009 12:06:39 AM

Hello everyone

i need some advice as to what connector to use on asus p6t deluxe v2 as it has a 8-pin EATX socket, The PSU ive ordered is the antec cp 850w that has a 4-pin ATX12v connector and a 8pin EPS12v connector, id like to know what connector i should use? and if its the 4-pin what side do i plug it into, i cant rule out 1 connector by not fitting because ive not got my PSU yet, thatnks for any help out there
catch u l8rs

More about : asus p6t deluxe eatx connector

a b Ĉ ASUS
December 12, 2009 12:13:16 AM

You will connect the 8-pin ESP12V connector to your motherboard. The 4-pin is in case you motherboard is older or doesn't have the 8-pin connector.
December 12, 2009 12:17:39 AM

tecmo34 said:
You will connect the 8-pin ESP12V connector to your motherboard. The 4-pin is in case you motherboard is older or doesn't have the 8-pin connector.

thanks tecmo i appreciate that, only took a cpl of mins too for reply im impressed, nice 1 again
Related resources
December 13, 2009 1:18:11 AM

I have the same mobo, but the Antec TP-750 PSU. my 8-pin EATX12V mobo socket had a 4-pin "cover" on it...so I installed the 4-pin power supply.
Did I screw up?
Should I remove the 4-pin "cover" and install an 8-pin power cable there?

Thanks!
December 13, 2009 4:38:21 AM

dwane_16 said:

Should I remove the 4-pin "cover" and install an 8-pin power cable there?


Yes.