Win 7 doesnt see Raid 0 setup
Last response: in Storage
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. did i do something wrong? using the x58 e760a1 mobo.
More about : win doesnt raid setup
Related ressources:
- ForumProblem with RAID 0 setup in Win7 64 bit
- ForumWin7 doesn't see RAID array
- ForumWin7 doesn't see RAID array
- ForumNot able to see marvel raid-0 in win 7 64 bit
- ForumCannot get into RAID setup utility or get Win7 on correct drive!
- ForumRAID 0 w/SSD MSI win7 64
- ForumA 7 V266-E RAID 0 setup ???
- ForumSetting up EFI - GPT based RAID 0 Setup . Stuck in windows install loop
- ForumSSD boot drive & RAID-0 Storage setup
- ForumRaid 0 setup
- ForumSSD Experts wanted: Low benchmark scores for OCZ Vertex 2 RAID0 setup
- ForumIf Raid 0 is suppose to be better, why doesn't it improve my WEI?
- ForumSSD Boot Drive with a RAID0 games setup
- ForumTrying to see old Raid 0 on new Windows 7 system
- ForumTrying to Share a Hard Drive That is Setup in a RAID 0
- ForumFirst SSD advice?
- ForumSWAPPING G-BYTE Z68 MB FOR ASUS Z68 MB WIN 7 SOFTWARE RAID QUESTION!
- ForumHelp needed with damaged raid-5 setup
- ForumRaid 5, adding a volume, think I screwed up
- Forum[RAID] Pegasus R4, upgradeable?
- More resources
Read discussions in other Storage categories
!
