AT&T 2 wire modem

[conntaxman]

Hello,I have a att 2wire modem.My friend connected up our server to it awhile back,the server broke,and I replaced it with a new server that I built, he set all the settings up in the ATT 2 wire for that one and it worked good. The other day the RAID failed on that one, so now I connected the old server[or the first server] to the modem [oh i fixed the compter by the way]. Now i cant print from it,or can not connect from another machine on Work Group. How/ what settings do I add to the 2wire. were it says EDIT fire wall settings? I can see the old server's name their and the printer and the other computer.
tks
John

 

[nhasian]

you didn't press the red button on the back of the 2wire modem did you?? That would reset it to defaults and you would lose the port forwarding settings. If you didn't mess with the 2wire modem, then you wouldn't need to change any settings in it. check the settings in the servers.

 

[conntaxman]

hello nhasian. I got it going and with the printer it was / i had to Re install the HP tool box.