i need help, i did my first ever build today. tomorrow im getting 2 hard drives for RAID 0 and i already have the WIN 7 disk, but for now i planned on using a Hard Drive from one of my really old computers( its only 40 gb lol) and that has XP on it. it was working fine before i took it out of that comp, but when i put it in my new one, the system would load. then id get the screen asking how id like to boot XP (like safe mode, or start normally) and no matter what i do the screen will then go black (once i make a selection), ill here by graphics card fan kick in for like half a second (im about 95% sure its the graphics card) and then the the monitor will say no signal and a second later the system will be booting up again (ill see the asus motherboard screen) can anyone help me with this.
im not sure if this helps at all but
this is my motherboard/cpu
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=5276652&CatId=4297
my graphics card (not sure if the fan is normal or it thats part of the problem)
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=5507339&csid=_22
and the HD im trying to use at the moment
http://www.newegg.com/Product/Product.aspx?Item=N82E16822144507&cm_re=maxtor_ultra_ata%2f133-_-22-144-507-_-Product
im not sure if this helps at all but
this is my motherboard/cpu
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=5276652&CatId=4297
my graphics card (not sure if the fan is normal or it thats part of the problem)
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=5507339&csid=_22
and the HD im trying to use at the moment
http://www.newegg.com/Product/Product.aspx?Item=N82E16822144507&cm_re=maxtor_ultra_ata%2f133-_-22-144-507-_-Product