no video

Archived from groups: alt.video.ptv.replaytv (More info?)

I have no video input at all.....not on video 1 or video 2 or direct
cable(ant) input.

I still can replay the recorded programs and Replay does call out and
receive clock setting and programming after rebooting.

Gordon (Phoenix)

Archived from groups: alt.video.ptv.replaytv (More info?)

Gordon Greenblatt wrote:

> I have no video input at all.....not on video 1 or video 2 or direct
> cable(ant) input.
>
> I still can replay the recorded programs and Replay does call out and
> receive clock setting and programming after rebooting.
>
> Gordon (Phoenix)
>
>
Has there been a change in service provider?? Go into setup and change
the inputs to nothing connected. On RF change to antenna. Save. Then go
in and restore your old settings. If this does not work, you could use
382 zones to reset. You will lose all your recordings, so either watch
them or transfer to pc first.

Archived from groups: alt.video.ptv.replaytv (More info?)

On Tue, 14 Sep 2004 18:42:36 -0700, "Gordon Greenblatt"
<gmgreen@cox.net> wrote:

>I have no video input at all.....not on video 1 or video 2 or direct
>cable(ant) input.
>

I have had that problem sometimes (when rebooting, there would be no
input). Rebooting again fixed that.

At least that problem seldom happens when the unit reboots itself.

>I still can replay the recorded programs and Replay does call out and
>receive clock setting and programming after rebooting.
>
>Gordon (Phoenix)
>

--
101 days until the winter solstice celebration

Mark Lloyd
http://notstupid.laughingsquid.com