Remotely change port configuration on Cisco7940s
Last response: in Networking
Was wondering if you can change the port configurations from auto detect to 100 full remotely with Cisco Call Manager 5.1.3 and the 7940/7960 phones. I have about 200 phones that the "network guys" want to be set to 100full!!!!
Thanks
Thanks
More about : remotely change port configuration cisco7940s
Tell the network guys they should leave the ports set to auto. We used to have all the ports set to 100 full and are now in the process of changing them all back to Auto config.
We have Cisco IP phones and if I remember right they don't like to be set at 100 full.
What is their reason for changing it?
We have Cisco IP phones and if I remember right they don't like to be set at 100 full.
What is their reason for changing it?
Related ressources:
- ForumUnable to Get Port 3389 Open and “Seen” for Remote Desktop
- ForumChange RDP Port in XP Firewall
- ForumICS and remote desktop port changing
- ForumChange VPN port #?
- ForumRDC port change
- Forumport 3389 Not listening remote desktop connection
- ForumConfiguration utility for Remote Desktop
- ForumChanging Remote Listening Ports for more than one computer
- ForumRemote Desktop port 3389 blocked
- Forumhow to offer remote support not throu port 3389
- Forumhow to manage dhcp server remotely via firewall
- ForumRemote Destop suddenly won't connect on any port other tha..
- ForumBudget PC Advice - This machine will remotely access office machin
- ForumRouter Setup
- ForumHigh powered and 48 port switches
- ForumHow to forward port
- ForumPort problem
- Forum[Solved] D-link Dl-524 change private address and error message
- ForumPort bonding
- ForumChange directory to a mapped drive
- More resources
Read discussions in other Networking categories
!
