Putting together final overclock Phenom II X4 960T 4 cores & 6 cores

Ok here's my situation.

I found max safe limits. Now I just need to dial in the right combo to get them stable.

I have a five settings that I want to get stable but don't know which one is better on a scale of 1-5 which one is best?




CPU multiplier in order of 2-5 as shown above:

2 = x19
3 = x18.5
4 = x16
5 = x15.5
13 answers Last reply
More about putting final overclock phenom 960t cores cores
  1. im assuming your CPU is a quad core Phenom II

    mine is set on 16x250 with a 2600MHz (approx) NB and HT, try not to go above 1600MHz with the ram

    you will have to adjust the Vcore, NB voltage, HT voltage, and i found it boots better with the SB over volted as well
  2. nna2 said:
    try not to go above 1600MHz with the ram

    because the imc is rated @ 1333? or because the ram is rated @ 1333?
  3. then try to stick by 1333, mines rated at 1600MHz, and anything above 1600 is unstable
  4. mine's also rated @ 1600MHz but I got up 1600 w/o instability.
  5. 1-5 setting better or not , depend software used (game/image/video/3D .. which ) everything had Plus and minus ... but i will change OC with safely FSB 210 and ram 1680 more stable .. than other because CPU OC use Multiplier
  6. ok i updated the OT with the multiplier...
  7. Final 6-core overclock!
    :bounce:


    Other than what's in the pic:

    SB voltage = 1.20V

    The following are enabled:

    CPU LLC
    CPU/NB LLC
    Cool N' Quiet
    C1E State
    Q-Fan CPU/Chassis Function: Manual
    Min. Processor State: 0% / Max Processor State: 100%

    Currently working on 4-core overclock. Stay tuned....
  8. nice stable ! i never get 1.48v for 4ghz .. my rig always 1.52v for 4ghz ... for now i use daily just 3.8Ghz (Vcore 1.44v) ... if you can drop vcore to 1.45v can used for daily :D
  9. nice overclock :P
  10. Here's the final 4-core overclock!
    :D


    Other than what's in the pic:

    HT Voltage = 1.25V
    SB voltage = 1.20V

    The following are enabled:

    CPU LLC
    CPU/NB LLC
    Cool N' Quiet
    C1E State
    Q-Fan CPU/Chassis Function: Manual
    Min. Processor State: 0% / Max Processor State: 100%
  11. Stealth3si said:
    Here's the final 4-core overclock!
    :D
    http://i50.tinypic.com/2d26s2d.jpg

    Other than what's in the pic:

    HT Voltage = 1.25V
    SB voltage = 1.20V

    The following are enabled:

    CPU LLC
    CPU/NB LLC
    Cool N' Quiet
    C1E State
    Q-Fan CPU/Chassis Function: Manual
    Min. Processor State: 0% / Max Processor State: 100%


    nice, i cant stay stable over 4GHz and i need 1.45V so you must have a pretty good chip :)
  12. Mine runs well at 1866.
Ask a new question

Read More

Overclocking Phenom