Sign in with
Sign up | Sign in
Your question

OCZ Vertex 3Max IOPS SATA III Raid 0

Last response: in Storage
Share
December 16, 2011 6:43:03 PM

Hola. tengo una placa gigabyte spiner chipsetx58,i7 990x nuevo, dos SSD OCZ Vertex 3Max IOPS SATA III 240 GB en raid 0 64 K de 480 GB , he puesto la placa marvell 6 gb/s de raid0 64k y funciona pero pruebo con ass ssd y crystaldismarkd resultado 620 mb/s en mi opinión es muy poco, dime como puedo solucionarlo para aumentar hasta 900 mb/s o mas? gracias
--------------------------------------------------------------
Hello. I have a gigabyte motherboard chipsetx58 Spiner, i7 990x again two IOPS SSD OCZ Vertex SATA III 3MAX 240 GB in raid 0 64 K to 480 GB, I have marvell plate 6 GB / s of 64k and raid0 works but try ssd and ass result crystaldismarkd 620 mb / s in my opinion is very little, tell me how I can fix it to increase to 900 mb / s or more? thanks
a c 302 G Storage
December 16, 2011 7:36:13 PM

RAID 0 is a risky way to set up your system. I recommend that you not do it unless you want to
1) Play with benchmarks, or
2) Solve a specific problem being caused by low throughput. If that is the case, give us more details and someone may have a better solution.
------------------------------------------
RAID 0 es una manera arriesgada de configurar su sistema. Le recomiendo que no lo haga a menos que desee
1) Jugar con los puntos de referencia, o
2) Resolver un problema específico causado por bajo rendimiento. Si ese es el caso, nos dan más detalles y alguien puede tener una mejor solución.
(Mi hija habla español, tengo que usar Google Translate.)
December 16, 2011 11:54:08 PM

sepe said:
Hola. tengo una placa gigabyte spiner chipsetx58,i7 990x nuevo, dos SSD OCZ Vertex 3Max IOPS SATA III 240 GB en raid 0 64 K de 480 GB , he puesto la placa marvell 6 gb/s de raid0 64k y funciona pero pruebo con ass ssd y crystaldismarkd resultado 620 mb/s en mi opinión es muy poco, dime como puedo solucionarlo para aumentar hasta 900 mb/s o mas? gracias
--------------------------------------------------------------
Hello. I have a gigabyte motherboard chipsetx58 Spiner, i7 990x again two IOPS SSD OCZ Vertex SATA III 3MAX 240 GB in raid 0 64 K to 480 GB, I have marvell plate 6 GB / s of 64k and raid0 works but try ssd and ass result crystaldismarkd 620 mb / s in my opinion is very little, tell me how I can fix it to increase to 900 mb / s or more? thanks


There is a known issue on Marvel 9128 chips. I have the x58-ud3r mobo with the 9128 and the documentation specifically says that SSD's in raid are not recommended. Your board has a Marvell 9182 chip. You may investigate to see if the same issue affects it as well. Some brief searching I did indicates it should not be an issue, but worth a more depth look maybe.

You also have to remember that the controller is on the Southbridge along with the intel sata controller, the jmicron sata controller, the audio, bigfoot nic, usb 2.0, and usb 3.0 controllers. All those share the DMI at 2 GB/s. That should be enough for both SSD's in RAID 0 to get full bandwidth, but depending on other devices running at the time, transport overhead, and processor overhead... who knows.
December 17, 2011 5:09:59 AM

cual es mejor tarjeta controlodora de sata 6 gb/s para 2x sata 3ssd raid 0?
---------------------------------------------------------------
controlodora which is best card for SATA 6 Gb / s for 2x sata 3 ssd raid 0?
!