Solved Accidently made volts 1.055 not 1.55 Tags: Memory DRAM Overclocking Last response: July 23, 2012 7:17 PM in Overclocking Share marcus8h July 23, 2012 6:49:06 PM i changes my dram volts to 1.055 thinking it was 1.55 for some reason. now my pc wont even turn on. just the fans and stuff but nothing on screen More about : accidently made volts 055 Best solution Z1NONLY a b K Overclocking July 23, 2012 7:02:42 PM Reset BIOS? (Clear CMOS) Turn off the power supply/pull the cord out. Remove the little disc battery.(Note polarity) Wait a few minutes (probably only needs a few seconds, but a couple minutes will do the trick for sure). Put the battery back in, connect cord/power. Then try turning on the computer. Share marcus8h July 23, 2012 7:16:53 PM Best answer selected by marcus8h. m 0 l Can't find your answer ? Ask ! Get the answer marcus8h July 23, 2012 7:17:09 PM great thank you! m 0 l Can't find your answer ? Ask ! Publish Related resources Is 1.155 volts a safe "permanent" voltage? Forum SolvedMy asus crosshair iv formula undervoltaged my ram to 1.55 volt and my rams are r Forum Accidently made primary monitor 2nd, now I have no display Forum Should i have the cpu volt on auto (1055t) Forum More resources Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !