Power/HDD/RESET wires too short on Antec 900 help

[04181979XXX]

what kind of wires do i need to make it longer can i just cut them and tape them together

 

[04181979XXX]

i mean twist the wires together

 

[aford10]

They should be plenty long enough. Try taking off the back side panel to see if the wires are zip tied together. Look to see if they are caught up on the chassis somewhere.

 

[jsc]

aford, they may not be long enough, especially if the front panel connector is on the lower edge of the motherboard. I know. I have 3 Antec 900's.

04, one thing you can do is to buy extension cables. I bought mine at frozenCPU.

 

[aford10]

Ok, I may be wrong. I haven't used that model yet.

The last build I just did had the antec 300, and they were proportionate length for the case size. Most motherboard front panel ports are at the lower edge of the board. Which is why I assumed a good company like Antec would think of that, and make their cables long enough.

 

[04181979XXX]

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131402
thats my board the power connecters are to far away i had to use the converter thingy it is bending the pin

 

[04181979XXX]

antec 900 is only a midtower

 

[04181979XXX]

yep

 

[04181979XXX]

aford, they may not be long enough, especially if the front panel connector is on the lower edge of the motherboard. I know. I have 3 Antec 900's.

04, one thing you can do is to buy extension cables. I bought mine at frozenCPU.

thanks ill buy the extension cables