So I finally got my Phenom II 850 from 3.30ghz to 3.96Ghz, I set my ram at 1333mhz 1.3.33 ratio and Im at 1600mhz now on the dot from 240fsb x 16.5 multiplier at 1.515 volts
I wanna go higher to the 4.0GHz+ range but my msi 870a G54 board says max 1600mhz *OC for ram, would it run into any problems going over? I know if i lower an extra step down to a 1.2 ratio for the ram I can achieve 1333mhz on the dot with a fsb of 250. Is it worth lowering or should I just go beyond 1600?
Sorry hope I made sense
I wanna go higher to the 4.0GHz+ range but my msi 870a G54 board says max 1600mhz *OC for ram, would it run into any problems going over? I know if i lower an extra step down to a 1.2 ratio for the ram I can achieve 1333mhz on the dot with a fsb of 250. Is it worth lowering or should I just go beyond 1600?
Sorry hope I made sense