Can't finish maxiumum in intelburntest, is that normal?

[gasolin]

Is it normal that a pc can't finish intelburntest (ibt) with succes at maximum stress level(max x10)

Havn't tried maximum x10 with standard cpu settings,because it takes about 6 min for one pass with my i7 870 and i couldn't wait

With 148 bclk and turbo (aut vcore) and 17x200 no turbo and about 1.250 vcore it didn't finish maximum 10 times without freezing or unstability.

Going to try maximum with std cpu setting later.

If i can't finish maximum with succes, could that be because the maximum test is using the ram block i am not using in the standard test, and my one ramblock is unstable? (2x4gb ddr3 kingston blue hyper x 1600mhz)

 

[gasolin]

Try raising vtt voltage..some..What chip are you using??

Asrock H55M LE motherborad i should be able to oc my cpu with 25% or more

With a gibayte motherboard i raised Bclk from 266 to 333 both cpu and ram and then my Q6600 ram 3.0 ghz instead of 2.4ghz



I am just taking intelburntest at maximum with my cpu on standard settings. So far it has passed the test 3 times out of 5 passes. Lokks like it's stable on std settings but NOT when i OC

 

[gasolin]

stable at std cpu settings and ibt at maximum (x5)

Is 5 times enough to se any unstability?

 

[gasolin]

I7 870 Revision B1