Sign in with
Sign up | Sign in
Your question
Solved

I5 760 + CNPS10X Performa = Very high temps

Last response: in Overclocking
Share
August 22, 2012 11:02:53 PM

Hello,

First, the system:

cpu: i5 760
mobo: P55A-UD4P
CPU cooler: cnps10x performa
GPU: 6850
Case: Antec 300

The goal is a 4.0 overclock. At a 3.6 overclock, I'm getting idle temps of 40, and while using IBT, my max temp is 91, which I consider pretty high.

Is the Performa just that bad, or am I doing something wrong here? (I followed this guide for OC by the way: http://www.techreaction.net/2010/09/07/3-step-overclock...)

Any help is appreciated.
a b à CPUs
August 23, 2012 12:04:41 AM

What is your fan setup?

As far as all he fans go in your case.
m
0
l
August 23, 2012 12:20:05 AM

When I did the above, I had 1 120mm fan in the front pushing air in, 1 140mm at the top of the case blowing out, 1 120mm on the top rear blowing out, and the cpu cooler fan blowing towards the heat sink and towards the rear.

I just moved things around, and my temps are 5 degrees lower while under load. (moved the front fan to the case panel, moved the rear fan to the other side of my cpu cooler, still blowing out).

Would it be worth it to add more fans? I still don't think that I should have to do this with the kind of aftermarket cooler I have.
m
0
l
Related resources

Best solution

a b à CPUs
August 23, 2012 12:32:01 AM

I would get another fan for the front of your case, to replace the one you moved.
Share
August 23, 2012 12:34:04 AM

I will be, but that shouldn't have this sort of affect on my temps, especially with the cooler.

Would buying an EVO be a better choice?
m
0
l
a b à CPUs
August 23, 2012 12:48:13 AM

squadz said:
I will be, but that shouldn't have this sort of affect on my temps, especially with the cooler.

Would buying an EVO be a better choice?


Yes, the design change of the heatpipes on the EVO alows for less air bubbles to form compared to the standard hyper212+
m
0
l
August 29, 2012 11:57:44 PM

Best answer selected by squadz.
m
0
l
!