Q6600 with the XFX 790i

[quiggy2512]

hey guys my little bro has a problem, he`s runnin a q6600 on the XFX790i board with 2x560 in sli and 4x2gb ddr3 vengeance. tryin to reach either 3ghz or 3.2ghz but its always gettin bsod. runs fine at 2.8 will all c1e etc disabled usuall stuff all in order. prob we have is when we get it to 3 it passes prime 95 for 8 hours then crashes,tried a few guides on voltages and diff settings also updated bios. am i correct in thinking the ram timings might be the problem 9-9-9-24, aybee loosen them a touch and up the north bridge, i will get him to join the post to let you know what exact voltages he is using as i live a little bit away from him, if any u great bunch of minds can help it would be appreciated.

he`s on h60 clc aswell so temps are exellent just cant get it stable

Cheers Again Davie

 

[quiggy2512]

thats me we brother`s bios set up there i got him to post it up to see if anyone could shed any light on the situation

Many Thanks Again

 

[ZombieCore]

hey guys my little bro has a problem, he`s runnin a q6600 on the XFX790i board with 2x560 in sli and 4x2gb ddr3 vengeance. tryin to reach either 3ghz or 3.2ghz but its always gettin bsod. runs fine at 2.8 will all c1e etc disabled usuall stuff all in order. prob we have is when we get it to 3 it passes prime 95 for 8 hours then crashes,tried a few guides on voltages and diff settings also updated bios. am i correct in thinking the ram timings might be the problem 9-9-9-24, aybee loosen them a touch and up the north bridge, i will get him to join the post to let you know what exact voltages he is using as i live a little bit away from him, if any u great bunch of minds can help it would be appreciated.

he`s on h60 clc aswell so temps are exellent just cant get it stable

Cheers Again Davie

XFX 790i Ultra SLI
Core 2 Quad Q6600 @ 2.4
4x 2gb Vengeance RAM
2 x Zotac Geforce GTX 560 2gb in Sli
Corsair GS600 PSU
Corsair H60 Liquid CPU cooler


CPU core - 1.4V
CPU FSB [auto] - 1.40v
Memory [Auto] - 1.500v
nForce SPP [Auto] - 1.35v
nForce MCP [Auto] - 1.5v

GTLVREF Lane 0 - auto - +00mv
GTLVREF Lane 1 - auto - +00mv
GTLVREF Lane 2 - auto - +00mv
GTLVREF Lane 3 - auto - +00mv

 

[Bejusek]

Lower the CPU multiplier, increase the FSB.
Instead of 9x333 try 8x375. Use correct memory divider to run it within specs.

Edit:
Increase gtlvref on all lanes a little, try +30mV.

 

[quiggy2512]

still no joy wont post! think the boasrds just not wanna clock, tryed everythingh in a lot of guides just frustrating it will run 2.8 and not hit 3 grrrrr lol

 

[ZombieCore]

its not the BSOD its just freezing after a few hours of running but not the bsod. it passed stress testing no problem then just crashes randomly when no programs are running. its just crashed at 2.8 also so i have no idea what to do I set it to defaults until something gets figured out