How to boot from raid controller Tags: NAS / RAID Controller Boot Components Last response: March 26, 2010 11:12 PM in Components Share dallen101 March 26, 2010 11:02:40 PM Hello, My problem is I don't have an SATA card to connect my hard drive to, so I'm trying to my RAID controller instead. What I'd like to know is if I can boot from my RAID controller and if so how do I? More about : boot raid controller das_stig March 26, 2010 11:12:12 PM Yes, but you normally need a floppy disk or usb pen drive with the correct raid drivers on it and use the o/s's advanced/F6 option to install before select which hdd to install too. Can't find your answer ? Ask ! Publish Related resources VIA VT6421 RAID Controller this is not about not being able to boot Forum INACCESSIBLE_ BOOT _DEVICE with new IDE RAID controller Forum IRQL_NOT_LESS_OR_EQUAL BSOD issue-likely Raid Controller ..thoughts? Forum Intel Rapid Storage RAID controller - Nothing happens with CTRL-I Forum How to apply update for JMicron RAID controller ? Forum How to mix bootable NON- RAID HDD and data RAID on the same controller ? Forum Converting a single hard drive with a RAID controller to IDE Forum RAID /SATA Controller driver. Forum Unplugging Drives on a RAID Controller Card... Caveats? Forum Raid 0 boot drive cannot boot up windows. how to recover data Forum Do I need a raid controller to use RAID 0, what is it for? Forum Best and most reliable raid controller Forum GA-Z68X-UD3P-B3 + 2 SSDs on Z68 Raid Controller Forum 6300 fx vishera black edition Forum How much faster is I5-750 OC compared to Athlon x2 6000 Forum [Solved] How do I read a power supply? Forum How to stop interference of bluetooth Forum Getting audio from lcd tv using hdmi cable from pc Forum [Solved] How easy is it to change out a PSU Fan? Forum [Solved] How do I lock core? Forum More resources Read discussions in other Components categories Power supplies Sound cards NICs Akasa Antec Cooler Master Cougar DeepCool Enermax !