[Solved] GA EX-58 UD3R in loop

Forum Systems : New Build [Solved] GA EX-58 UD3R in loop

Hi everyone! :hello:
I've just built my first system, here are the specs:
GA EX-58 UD3R mobo
Intel i7-920
XFX HD 5850 1G Core Edition
OCZ Gold 6GB CL8-8-8-24 1.65V
Segate Barracuda 1.5TB
Antec EarthWatts 650W PSU
Antec Nine Hundred Two Case

So here is my problem:
I connect everything, nice and tight. But when I try to turn on the system, it goes into a loop, lasting about 2-3 seconds, then turning off, then starting again. But when I remove the 12V rail, the GPU and fans start up, however, obviously, there is no display on the screen. I have tried everything I could find on forums, from using one RAM module to pulling everything apart and building again. And now, I think it could be due to a faulty PSU. Please give your thoughts. Any help is appreciated.
Thanks in advance.

Reply to MAZWANTGUN

Best answer

Have you checked your front panel connectors?? Mainly the power/reset connections. If you suspect that they aren't hooked up right or maybe one of the switches is bad, you can jumper the power switch on the mobo to test it out. It may be the PSU, but I'd just double check all of your connections (which I don't know if you did already or not.

Reply to lunyone

Best answer selected by MAZWANTGUN.

Reply to MAZWANTGUN

Apparently there was a circuitry problem with my mobo. So I returned it, and I got a new one. Now everything works fine. Thanks for responding!

Reply to MAZWANTGUN

Ask the community Add a reply

Related content

See all topics related to "GA EX-58 UD3R in loop"

Tom's Hardware > Forum > Systems > New Build > [Solved] GA EX-58 UD3R in loop

Go to:

Help |
Forum rules

There are 1818 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group

Page generated in 3.425 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel

Ads

Latest best answer

Gigabyte z77x not working with corsair tx750?

By smorizio, 56 minutes ago:

[quotemsg=2611689,1,1216211]hi guys i need some help, im not getting any power to the...

[Solved] GA EX-58 UD3R in loop

Forum Systems : New Build [Solved] GA EX-58 UD3R in loop

Homebuilt

New Build

Prebuilt

CyberPower

Please mind