No Juice...

[alphaman9]

I put a new pc together, plug in the power supply and I get no juice at all. I double checked all the cables and can't figured out what I did wrong. I'm at a stand still.

My mobo is Gigabyte 790XTA-UD4, Phenom II X4 965 BE, Seagate 7200.12 500GB, Galaxy 9800, Antec 650W earthwatts, Antec 900 case.

Any help is highly appreciated.

 

[tecmo34]

Read through this sticky for troubleshooting tips and check off on each task... http://www.tomshardware.com/forum/261145-31-read-posting-boot-problems

 

[jsc]

Do you have a system speaker installed? If not, you really need one, especially with a nonworking system.

 

[alphaman9]

Thank you for the link tecmo. I got it working. I plug the power switch into the LED- & LED+ position, stupid me lol. Now, there's a minor issue. The CPU fan is not fully spinning. It spins a lil then stop, spins a lil then stop. It couldn't make one revolution. Can I plug the CPU fan into the system fan area? Can I use any 120mm fan to replace the current CPU fan? Btw, my heatsink is a Hyper 212 Plus.

 

[tecmo34]

You need to keep the fan plugged into the CPU Fan slot on the MOBO. You can replace the fan with any 120mm fan with a 3-pin or 4-pin fan connector, not just a Molex connector.

 

[alphaman9]

Best answer selected by Alphaman9.

 

[alphaman9]

You need to keep the fan plugged into the CPU Fan slot on the MOBO. You can replace the fan with any 120mm fan with a 3-pin or 4-pin fan connector, not just a Molex connector.

thanks tecmo.