Search
Sign in with
Sign up | Sign in

G41mt-d3v overclocking problem

Last response: in Overclocking
Share

i have a Intel Core 2 Duo E8200 i cant move the frequancy past Freq : 2720.09 MHz (340.01 x 8) standard is 2.66ghz (333.00 x8) if i do it wont boot it just cuts off.
the motherboard is

MB Brand : Gigabyte
MB Model : G41MT-D3V
NB : Intel G41 rev A3

and

GPU Type : Radeon X1950 Series

psu cit 500w

and ram is

RAM : 4096 MB DDR3 Dual Channel
RAM Speed : 544 MHz (5:8) @ 8-8-8-20
Slot 1 : 2048MB (10700)
Slot 1 Manufacturer : Corsair
Slot 2 : 2048MB (10700)
Slot 2 Manufacturer : Corsair

is it coz of the g41 chipset unable to cope with ovetclocking it or is there something else i am missing i have disableys c1e and speed stepand i cant change the core voltage
thanks :D 

More about : g41mt d3v overclocking problem

Register or log in to remove
Motherboard Authority
Overclocking Expert

G41 is not meant for overclocking, it has integrated graphics and it's micro-atx.

You could try changing your fsb/dimm ratio so that the memory runs at or under it's rated speed, this could be the reason for your failed overclock.
Motherboard Expert

geekapproved said:
G41 is not meant for overclocking, it has integrated graphics and it's micro-atx.

You could try changing your fsb/dimm ratio so that the memory runs at or under it's rated speed, this could be the reason for your failed overclock.


Gigabyte g41 can overclock just fine
Related ressources
Ask the community

i have tried everythin fsb standard is 333.00 x8 most i can change it is 340.00 x8 if i move it to 341 and it just cuts off before monitor is gonna turn on and then reboots i tried changin memory speeds i think it says rated 1333 and its at 1035 or somethin like that i tried changin voltage but wen i boot up cpuz says its at like 1.03
Register or log in to remove
 
Ask the community
Read discussions in other Overclocking categories
!