Writing 4 dvds at once fails

Hi Friends,

When i try to write 4 DVD at once using nero multiple recorder at 12x speed, two of them fails. can you plz tell why

I have a Quad Q6600
4Gb Ram
4 DVD drives from samsung ( same series and version and make)
Corsair tx850 smps
Seagate 1tb hard disk 7,200 rpm

writing two dvds simultaneously works, but does not work for 4 dvd's at once

thanks
krishna
10 answers Last reply
More about writing dvds fails
  1. As far as I am aware, for more than 2 or 3 dvd burns simultaneously you'll need a DVD duplicator Try lowering the speed and try again but in my opinion it wont work because it's causing a buffer underrun and can't feed the data to each of the 4 dvd drives at that speed at the same time. What error message are you getting?
  2. how are the burners connected to the mobo??? IDE or SATA?
  3. Burn two, or you can try adding a hard drive and more ram.
  4. I typically burn 2 at a time, with Nero at 8X write speed in order to fully write each data bit on my Pioneer 111D drives, Q6700 system, with 2 HDs in RAID 0. With periodic defragging of the HDs, I can generally play Dragon Age at the same time as writing both discs without a problem. I don't have 4 burners however so I dunno if your failure is a Nero or system limitation..
  5. 4 at a time? you in a hurry?
  6. OvrClkr said:
    4 at a time? you in a hurry?


    LOL - if so, I don't think we wanna know the reason why... Maybe he doesn't read that FBI warning generally included with every commercial DVD..
  7. Would 2 HDs help with that many burners running?
  8. fazers_on_stun said:
    LOL - if so, I don't think we wanna know the reason why... Maybe he doesn't read that FBI warning generally included with every commercial DVD..


    I dont see the point in burning 4 DVD/CD's at once, if the OP does not find a solution to his issue he should settle for 2 burns at a time just like zip suggested.

    Supply and demand ? :lol:
  9. ronaldwishart said:
    how are the burners connected to the mobo??? IDE or SATA?


    All 4 are sata drives and all new drives
  10. Here is the error file or log file


    Hare Ram
    Ak
    1C82-0000-19E5-MAAX-4003-0461-****

    Windows XP 6.1
    AMD64
    Wow64Process
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.10.1.0
    Internal Version: 7, 10, 1, 0

    Recorder: <TSSTcorp CDDVDW SH-S223C (0/1)>Version: ID00 - HA 1 TA 0 - 7.10.1.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    Recorder: <TSSTcorp CDDVDW SH-S223C (1/1)>Version: ID00 - HA 1 TA 1 - 7.10.1.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    Recorder: <TSSTcorp CDDVDW SH-S223C (2/1)>Version: ID00 - HA 1 TA 2 - 7.10.1.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    Recorder: <TSSTcorp CDDVDW SH-S223C (3/1)>Version: ID00 - HA 1 TA 3 - 7.10.1.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CDDVDW SH-S223C >Version: ID00 - HA 1 TA 1 - 7.10.1.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===

    === CDRom-Device-Map ===
    TSSTcorp CDDVDW SH-S223C H: CdRom0
    TSSTcorp CDDVDW SH-S223C I: CdRom1
    TSSTcorp CDDVDW SH-S223C J: CdRom2
    TSSTcorp CDDVDW SH-S223C K: CdRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 4060MB (4157752kB)
    Free physical memory: 2916MB (2986900kB)
    Memory in use : 28 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    29.3.2010
    Burn DVD Image
    6:07:19 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:07:19 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:07:19 PM #3 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:07:19 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:07:19 PM #5 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3747250176
    CUES:
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Users\Hare Ram\Desktop\Image.nrg>

    6:07:19 PM #6 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    6:07:19 PM #7 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    6:07:19 PM #8 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    6:07:19 PM #9 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    6:07:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1829711 (406:36.11, 3573MB)

    6:07:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    6:07:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: TSSTcorp CDDVDW SH-S223C (0/1), Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    6:07:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:07:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1829711 (406:36.11, 3573MB)

    6:07:20 PM #15 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    6:07:20 PM #16 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: TSSTcorp CDDVDW SH-S223C (1/1), Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    6:07:20 PM #17 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:07:20 PM #18 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1829711 (406:36.11, 3573MB)

    6:07:20 PM #19 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    6:07:20 PM #20 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: TSSTcorp CDDVDW SH-S223C (2/1), Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    6:07:20 PM #21 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:07:20 PM #22 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1829711 (406:36.11, 3573MB)

    6:07:20 PM #23 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    6:07:20 PM #24 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: TSSTcorp CDDVDW SH-S223C (3/1), Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    6:07:20 PM #25 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:07:20 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1829712 (1829712) = #1829712/406:36.12
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks [H: TSSTcorp CDDVDW SH-S223C]
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks [J: TSSTcorp CDDVDW SH-S223C]
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks [K: TSSTcorp CDDVDW SH-S223C]
    --------------------------------------------------------------

    6:07:20 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [H: TSSTcorp CDDVDW SH-S223C] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
    1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    6:07:20 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
    1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    6:07:20 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [J: TSSTcorp CDDVDW SH-S223C] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
    1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    6:07:20 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [K: TSSTcorp CDDVDW SH-S223C] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
    1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    6:07:20 PM #31 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    6:07:20 PM #32 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    6:07:20 PM #33 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    6:07:20 PM #34 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    6:07:20 PM #35 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    6:07:20 PM #36 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    6:07:20 PM #37 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    6:07:20 PM #38 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    6:07:20 PM #39 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 12x (16,620 KB/s)

    6:07:20 PM #40 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    6:07:20 PM #41 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    6:07:21 PM #42 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:07:21 PM #43 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:07:21 PM #44 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    6:07:21 PM #45 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:07:21 PM #46 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:07:21 PM #47 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    6:07:21 PM #48 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:07:21 PM #49 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:07:21 PM #50 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    6:07:21 PM #51 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:07:21 PM #52 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:07:21 PM #53 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 125820800

    6:07:55 PM #54 Text 0 File Cdrdrv.cpp, Line 1352
    18:07:55.730 - K: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:07:57 PM #55 Text 0 File Cdrdrv.cpp, Line 1352
    18:07:57.010 - H: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:08:22 PM #56 Text 0 File Cdrdrv.cpp, Line 1352
    18:08:22.859 - I: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:08:23 PM #57 Text 0 File Cdrdrv.cpp, Line 1352
    18:08:23.857 - J: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:09:58 PM #58 Text 0 File Cdrdrv.cpp, Line 1352
    18:09:58.081 - H: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:10:18 PM #59 Text 0 File Cdrdrv.cpp, Line 1352
    18:10:18.127 - K: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:10:50 PM #60 Text 0 File Cdrdrv.cpp, Line 1352
    18:10:50.435 - I: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:10:50 PM #61 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x82
    CDB Data: 0x2A 00 00 08 3B 80 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 82
    Buffer x27f07b40: Len x10000
    0x00 00 01 BA 44 4B 6C BB 7E 57 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 E9 DF 38 C7 3D 1B 01 EF D0
    0xE2 8E 94 EC D2 EB 99 8F F0 08 C0 78 03 C2 32 84

    6:10:50 PM #62 CDR -1135 File Writer.cpp, Line 303
    Write error
    I: TSSTcorp CDDVDW SH-S223C

    6:10:52 PM #63 Text 0 File Cdrdrv.cpp, Line 1352
    18:10:52.869 - J: TSSTcorp CDDVDW SH-S223C : Queue again later

    6:10:53 PM #64 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x82
    CDB Data: 0x2A 00 00 08 3D A0 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 82
    Buffer x28017f80: Len x10000
    0x00 00 01 BA 44 4B 7E FB 25 57 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 5C 71 A9 5C FE 39 2E 20 C3
    0x34 25 B3 67 13 F8 23 AF A8 B4 9C 49 CE DA EA E1

    6:10:53 PM #65 CDR -1135 File Writer.cpp, Line 303
    Write error
    J: TSSTcorp CDDVDW SH-S223C

    6:15:59 PM #66 Text 0 File WriterStatus.cpp, Line 113
    <K: TSSTcorp CDDVDW SH-S223C> start writing Lead-Out at LBA 1829712 (1BEB50h), length 0 blocks

    6:15:59 PM #67 Text 0 File WriterStatus.cpp, Line 113
    <H: TSSTcorp CDDVDW SH-S223C> start writing Lead-Out at LBA 1829712 (1BEB50h), length 0 blocks

    6:16:14 PM #68 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 1829711 (1BEB4Fh)

    6:16:14 PM #69 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 539519 (83B7Fh)

    6:16:14 PM #70 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 540063 (83D9Fh)

    6:16:14 PM #71 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 1829711 (1BEB4Fh)

    6:16:14 PM #72 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 12x (16,620 KB/s)

    6:16:14 PM #73 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    6:16:17 PM #74 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    6:16:17 PM #75 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    6:16:19 PM #76 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    6:16:19 PM #77 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    6:16:21 PM #78 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    6:16:21 PM #79 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    6:16:24 PM #80 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    6:16:24 PM #81 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:16:24 PM #82 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:16:24 PM #83 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:16:24 PM #84 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Ask a new question

Read More

CPUs DVD