/ Sign-up
Your question

H100 Water cooler

  • Water Cooling
  • Cooling
  • Overclocking
Last response: in Overclocking
October 4, 2012 5:33:31 PM

Hey guys, I went with an h100 closed system this time. I have it in push pull config with corsair's SP120s performance edition. But sometimes 1 or the 4 fans stops working. Typically the bottom fan closest to the tubing. The cpu never gets close to overheating regardless of what i do. Just wondering if anyone knows if this is normal or bad. Thanks guys!

More about : h100 water cooler

a c 205 K Overclocking
October 4, 2012 7:38:03 PM

Always the same fan? swap it with another one on the rad, see if it is the fan at fault, or possibly the connector it is using,