Sign in with
Sign up | Sign in
Your question

Asus Sabertooth Z77 + H100 Push/Pull configuration

Last response: in Overclocking
Share
October 11, 2012 8:41:29 PM

Hi all, Started researching for my latest build. I currently Have this as a start of a Z77-I5K Build.

ASUS SABERTOOTH Z77
EVGA 02G-P4-2680-KR GeForce GTX 680
CORSAIR AX850 (CMPSU-850AX)
Intel Core i5-3570K
2x OCZ Vertex 4 VTX4-25SAT3-128G
Raid 0 configuration
CORSAIR Dominator Platinum 8GB (2 x 4GB)
CORSAIR H100 with Cougar Fans
Here's my question what Case would give me excellent configuration using H-100 in Push/Pull configuration without modding?

More about : asus sabertooth z77 h100 push pull configuration

October 11, 2012 9:26:09 PM

Hazuzu said:
Hi all, Started researching for my latest build. I currently Have this as a start of a Z77-I5K Build.

ASUS SABERTOOTH Z77
EVGA 02G-P4-2680-KR GeForce GTX 680
CORSAIR AX850 (CMPSU-850AX)
Intel Core i5-3570K
2x OCZ Vertex 4 VTX4-25SAT3-128G
Raid 0 configuration
CORSAIR Dominator Platinum 8GB (2 x 4GB)
CORSAIR H100 with Cougar Fans
Here's my question what Case would give me excellent configuration using H-100 in Push/Pull configuration without modding?


I personally have 2 PCs setup with Corsair H100s running in them. One is an AMD 8150 on an ASUS board and the other is an Intel 3770k on an ASUS Sabertooth Z77. With both PCs I am using the Cooler Master Storm Trooper. I know it is a huge case but i have had no issues with the Corsair H100 setup running right next to my motherboards.
m
0
l
October 11, 2012 10:06:19 PM

BuckNakedBooda said:
I personally have 2 PCs setup with Corsair H100s running in them. One is an AMD 8150 on an ASUS board and the other is an Intel 3770k on an ASUS Sabertooth Z77. With both PCs I am using the Cooler Master Storm Trooper. I know it is a huge case but i have had no issues with the Corsair H100 setup running right next to my motherboards.


Thanks, I have looked over that case as well. Do you use the H100 in 4fan push pull config? Also Sabertooth Z77 motherboard armor has a high cover towards the top; will it clear and not killing the 8 pin or board? I have looked at CM HAF X and C70 and cosmos II (if only,$$$) , Corsair 600T & 800D, Even though I would like a mid-tower instead of a Full, but would rather get the clearance and excellent Cooling/performance, since I'm looking to OC around 4.0-4.2 range.
m
0
l
Related resources
October 12, 2012 5:15:04 AM

Hazuzu said:
Thanks, I have looked over that case as well. Do you use the H100 in 4fan push pull config? Also Sabertooth Z77 motherboard armor has a high cover towards the top; will it clear and not killing the 8 pin or board? I have looked at CM HAF X and C70 and cosmos II (if only,$$$) , Corsair 600T & 800D, Even though I would like a mid-tower instead of a Full, but would rather get the clearance and excellent Cooling/performance, since I'm looking to OC around 4.0-4.2 range.


Just to let you know I am only doing the 2 fan push. Not 4 fans...
m
0
l
a c 150 K Overclocking
October 12, 2012 5:18:31 AM

Go custom watercooling.
m
0
l
October 12, 2012 6:15:48 AM

BuckNakedBooda said:
I personally have 2 PCs setup with Corsair H100s running in them. One is an AMD 8150 on an ASUS board and the other is an Intel 3770k on an ASUS Sabertooth Z77. With both PCs I am using the Cooler Master Storm Trooper. I know it is a huge case but i have had no issues with the Corsair H100 setup running right next to my motherboards.


can you please send me some picks of your build, its very similar to what i will be building in the near future thx :D  just want to see gear inside a cm storm trooper.
m
0
l
October 14, 2012 3:10:59 PM

hiporc said:
can you please send me some picks of your build, its very similar to what i will be building in the near future thx :D  just want to see gear inside a cm storm trooper.


Here are some pics I took this morning of the Sabertooth Z77 inside one of my Cooler Master Storm Troopers





m
0
l
March 22, 2013 12:32:18 PM

not sure how old this thread is but ill answear any way.
I to wanted push pull, but guess what its not enough room for push pull with z77 sabertooth, as the mobo coverage is in the way -.-
m
0
l
!