Sign in with
Sign up | Sign in
Your question

Marvel adapter 88se91 no hard drive detected

Last response: in Motherboards
Share
Anonymous
a b V Motherboard
September 16, 2010 10:12:28 PM

Hi,

I have an ASUS P6T Deluxe motherboard. When the computer boots up I get a message following the marvell adapter line that reads Disks Information: No hard disk is detected. Why is this message coming up?
a b Ĉ ASUS
a c 234 V Motherboard
September 17, 2010 1:38:48 AM

Does it still boot afterwards?

You can just disable the controller and the message should go away.
Anonymous
a b V Motherboard
September 17, 2010 3:45:51 PM

It does still boot. Just disable the marvell controller? I have a RAID 0.
Related resources
a b Ĉ ASUS
a c 234 V Motherboard
September 17, 2010 4:21:11 PM

Is your RAID setup on the Marvell controller??

If so than no... If no, it won't effect it..
Anonymous
a b V Motherboard
September 17, 2010 6:08:43 PM

I assume its set up on the Marvell controller but don't know that for a fact. How can you verify that? If it is set up on the marvell controller, why am I getting the no hard disk detected? I can boot up to windows.
a b Ĉ ASUS
a c 234 V Motherboard
September 17, 2010 6:51:14 PM

Typically, the Marvell is a dedicate SATA port on the motherboard, so check how it is installed.
Anonymous
a b V Motherboard
September 17, 2010 9:10:13 PM

I have disabled the Marvell Controller and everything still boots up but I still get the message No hard disk detected. What else could this be. I don't know if its related but I am trying to upgrade vista 64bit to Win 7 64 bit and at the end of the installation I get an error that says windows cant write to the boot record. I'm puzzeled.
!