Sign in with
Sign up | Sign in
Your question

P6t se hard drives not recognized

Last response: in Systems
Share
February 11, 2010 4:43:06 PM

Hello,
New installation, POST OK, BIOS reports "No drives found". Looking in BIOS it shows the hard drives by their SATA connection number so connection seems OK. What do I do next to get BIOS to find HD on startup?
February 11, 2010 4:54:24 PM

Have you tried to install an OS on one of the disks yet? The BIOS may not be recognizing them because they're not formatted. If you can't install an OS, then either you didn't hook them up right or they're DOA.
m
0
l
February 18, 2010 3:50:16 AM

raybob95 said:
Have you tried to install an OS on one of the disks yet? The BIOS may not be recognizing them because they're not formatted. If you can't install an OS, then either you didn't hook them up right or they're DOA.


Thanx for replying Raybob. I found out that I had to turn off a board feature (J-Micron Controller) that was defaulted 'on'. It didn't find my HDs because I wasn't using that feature. When I disabled it all is well. Thanks again.
m
0
l
!