Sign in with
Sign up | Sign in
Your question

Thermaltake Water 2.0 Extreme in NZXT phantom 410

Last response: in Overclocking
Share
November 29, 2012 2:08:19 AM

Has anyone successfully fit the Thermaltake Water 2.0 Extreme in a phantom 410 in the top. it says good up to 240mm radiators but not really finding measurements on it. i need to get off of air cooling since i've been pushing my 2600k a little harder then i was planning. what you guys got for me?

Thanks in advance
a c 78 K Overclocking
November 30, 2012 7:11:44 AM

what air unit are you using atm? chances are the name you mention is actually far better than the Tt unit you've mentioned. BTW, they are crap to own, best stay away away from them.
m
0
l
November 30, 2012 10:14:26 PM

good to know. i'm using a cm 212 evo with push pull atm
m
0
l
Related resources
a c 78 K Overclocking
November 30, 2012 10:31:45 PM

why don't you head down to the watercooling sticky? there's a CLC(closed loop cooler) section in it - with some helpful info. In fact it may steer you to a good unit. But best go for the real thing when you're at it :) 

my 2 cents :D 
m
0
l
a b K Overclocking
November 30, 2012 10:47:07 PM

Thermaltake Water 2.0 Extreme/pro are really good ones for closed loop watercooling.
Not crap, It can compete with hydro h100 with less noise and the extreme really beats the h100.
m
0
l
a c 78 K Overclocking
November 30, 2012 10:51:34 PM

please read the watercooling sticky to realize why i said its bad...
m
0
l
!