I am doing a Mini ITX build in a custom case with a seperate chamber for a watercooling radiator. It's a 3570k and a 7970. Will this setup work well enough to cool both of these.
80mm x 120mm radiator-
http://www.frozencpu.com/products/16235/ex-rad-409/Alphacool_NexXxoS_Monsta_Single_120mm_Radiator_-_80mm_Thick.html
Resevoir-
http://www.frozencpu.com/products/13183/ex-res-282/Alphacool_Cape_Corp_Coolplex_Pro_10_LT_-_100mm.html
Shrouds-
http://www.frozencpu.com/products/12392/ex-rad-201/Feser_Admiral_Series_Xtender_120mm_Radiator_Shroud_-_Dual_Green_LED_.html
Fans-
http://www.frozencpu.com/products/11637/fan-745/Aerocool_Shark_Black_Edition_120mm_x_25mm_High_Air_Pressure_Fan.html
CPU Water Block-
http://www.frozencpu.com/products/17480/ex-blc-1345/EK_Supreme_LTX_Intel_CPU_Liquid_Cooling_Block_-_Acrylic_CSQ_EK-Supreme_LTX_CSQ.html
GPU Water Block-
http://www.frozencpu.com/products/16692/ex-blc-1183/EK_Radeon_HD_7970_VGA_Liquid_Cooling_Block_-_Acetal_CSQ_EK-FC7970_-_Acetal_CSQ.html
Pump-
http://www.frozencpu.com/products/7505/ex-pmp-64/Danger_Den_DD-CPX_Pro_12V_3_Pin_Powered_Pump_-_237_GPH_DD-CPX_Pro.html?tl=g30c107s153
Will this setup work well enough to cool both of these slightly overclocked? If yes should the CPU or the GPU go first? Its between this with a HDD and a closed loop on the CPU only with a SSD.
80mm x 120mm radiator-
http://www.frozencpu.com/products/16235/ex-rad-409/Alphacool_NexXxoS_Monsta_Single_120mm_Radiator_-_80mm_Thick.html
Resevoir-
http://www.frozencpu.com/products/13183/ex-res-282/Alphacool_Cape_Corp_Coolplex_Pro_10_LT_-_100mm.html
Shrouds-
http://www.frozencpu.com/products/12392/ex-rad-201/Feser_Admiral_Series_Xtender_120mm_Radiator_Shroud_-_Dual_Green_LED_.html
Fans-
http://www.frozencpu.com/products/11637/fan-745/Aerocool_Shark_Black_Edition_120mm_x_25mm_High_Air_Pressure_Fan.html
CPU Water Block-
http://www.frozencpu.com/products/17480/ex-blc-1345/EK_Supreme_LTX_Intel_CPU_Liquid_Cooling_Block_-_Acrylic_CSQ_EK-Supreme_LTX_CSQ.html
GPU Water Block-
http://www.frozencpu.com/products/16692/ex-blc-1183/EK_Radeon_HD_7970_VGA_Liquid_Cooling_Block_-_Acetal_CSQ_EK-FC7970_-_Acetal_CSQ.html
Pump-
http://www.frozencpu.com/products/7505/ex-pmp-64/Danger_Den_DD-CPX_Pro_12V_3_Pin_Powered_Pump_-_237_GPH_DD-CPX_Pro.html?tl=g30c107s153
Will this setup work well enough to cool both of these slightly overclocked? If yes should the CPU or the GPU go first? Its between this with a HDD and a closed loop on the CPU only with a SSD.