Ok i found the right forumn
Last response: in Overclocking
so i guess my question would be did i make a solid rig that would withstand heat from the fans in the case and the parts i put in it.
here is my rig :
INTEL, Core™ i5-3570K Quad-Core 3.4 - 3.8GHz TB, HD Graphics 4000, LGA1155, 6MB L3 Cache, 22nm, 77W, EM64T EIST VT-x XD, Retail
ARCTIC, MX-4 All-Around Thermal Compound, Electrically Non-Conductive
ASUS, Sabertooth Z77, LGA1155, Intel® Z77, DDR3-1866 32GB /4, PCIe x16 SLI CF /1+1*, SATA 6Gb/s RAID 5 /4, 3Gb/s /4, DP + HDMI, USB 3.0 /6, HDA, GbLAN, ATX, Retail
CORSAIR, 8GB (2 x 4GB) Vengeance™ Red PC3-17000 DDR3 2133MHz CL9 (9-11-10-30) 1.5V SDRAM DIMM, Non-ECC
EVGA, GeForce® GTX 670 Superclocked+ w/ Backplate 967MHz, 4GB GDDR5 6008MHz, PCIe x16 SLI, 2x DVI + HDMI + DP, Retail
OCZ, 240GB Vertex 3 SSD, MLC SandForce SF-2281, 550/520 MB/s, 2.5-Inch, SATA 6 Gb/s, Retail
WESTERN DIGITAL, 500GB WD Caviar® Blue™ (WD5000AAKX), SATA 6 Gb/s, 7200 RPM, 16MB cache, OEM
RAID, No RAID, Independent HDD Drives
SABRENT, CRW-UINB Black 65-in-1 Card Reader/Writer Drive, 3.5" Bay, Internal USB
SAMSUNG, Super-WriteMaster™ SH-224BB Black 24x DVD±R/RW Dual-Layer Burner, SATA, w/o Software, OEM
RAIDMAX, Raptor Black/Red Mid-Tower Case, ATX, No PSU, Steel/Plastic
CUSTOM WIRING, Standard Wiring with Precision Cable Routing and Tie-Down
CORSAIR, TX850 V2 Power Supply 850W, 80 PLUS® Bronze, 24-pin ATX12V v2.31 EPS12V 2.92, 4x 8/6-pin PCIe
Please be gentle![:)]( ":)")
here is my rig :
INTEL, Core™ i5-3570K Quad-Core 3.4 - 3.8GHz TB, HD Graphics 4000, LGA1155, 6MB L3 Cache, 22nm, 77W, EM64T EIST VT-x XD, Retail
ARCTIC, MX-4 All-Around Thermal Compound, Electrically Non-Conductive
ASUS, Sabertooth Z77, LGA1155, Intel® Z77, DDR3-1866 32GB /4, PCIe x16 SLI CF /1+1*, SATA 6Gb/s RAID 5 /4, 3Gb/s /4, DP + HDMI, USB 3.0 /6, HDA, GbLAN, ATX, Retail
CORSAIR, 8GB (2 x 4GB) Vengeance™ Red PC3-17000 DDR3 2133MHz CL9 (9-11-10-30) 1.5V SDRAM DIMM, Non-ECC
EVGA, GeForce® GTX 670 Superclocked+ w/ Backplate 967MHz, 4GB GDDR5 6008MHz, PCIe x16 SLI, 2x DVI + HDMI + DP, Retail
OCZ, 240GB Vertex 3 SSD, MLC SandForce SF-2281, 550/520 MB/s, 2.5-Inch, SATA 6 Gb/s, Retail
WESTERN DIGITAL, 500GB WD Caviar® Blue™ (WD5000AAKX), SATA 6 Gb/s, 7200 RPM, 16MB cache, OEM
RAID, No RAID, Independent HDD Drives
SABRENT, CRW-UINB Black 65-in-1 Card Reader/Writer Drive, 3.5" Bay, Internal USB
SAMSUNG, Super-WriteMaster™ SH-224BB Black 24x DVD±R/RW Dual-Layer Burner, SATA, w/o Software, OEM
RAIDMAX, Raptor Black/Red Mid-Tower Case, ATX, No PSU, Steel/Plastic
CUSTOM WIRING, Standard Wiring with Precision Cable Routing and Tie-Down
CORSAIR, TX850 V2 Power Supply 850W, 80 PLUS® Bronze, 24-pin ATX12V v2.31 EPS12V 2.92, 4x 8/6-pin PCIe
Please be gentle
More about : found forumn
Related ressources
- Wake on lan over the internet - Forum
- Asus Maximus Formula Instability after 2nd RMA Help! - Forum
- Need help picking Mobo for given CPU/Mem/HDD - Forum
- A64 and FX DESTROYED BY EE - Forum
- Windows trouble with A7A installation - Forum
cooler masters are notorious for good airflow for example haf 932 or haf x...
i switched from a haf 932 to a raven03, partially cos i got bored but also because i have a dog and he loses a lot of hair so i needed a case with lots of filters (haf 932 didnt have filters everywhere this one does...)
getting filters and preventing dust build up (there will be some dust coming in anyway) by also having big positive air pressure (more intakes than exhausts) should help...
although filters apparently make the case louder and restrict airflow ( i didnt notice any change in temps after the move, and i got 5 sickleflows and a akasa venom all at 1900 rpm on top of all stock fans that come with the cases)
hope this helps... cheers
i switched from a haf 932 to a raven03, partially cos i got bored but also because i have a dog and he loses a lot of hair so i needed a case with lots of filters (haf 932 didnt have filters everywhere this one does...)
getting filters and preventing dust build up (there will be some dust coming in anyway) by also having big positive air pressure (more intakes than exhausts) should help...
although filters apparently make the case louder and restrict airflow ( i didnt notice any change in temps after the move, and i got 5 sickleflows and a akasa venom all at 1900 rpm on top of all stock fans that come with the cases)
hope this helps... cheers
I really have been liking my new Rosewill Thor V2. More airflow than I could ever dream. With the pair of 120mm's on my processor, cheap coolermaster 120mm in the bottom and the stock fans that came with the case; with all of the fans on high it literally causes a wild amount of airflow under my entire desk and behind my Movie setup with my 47" LCD. ![:)]( ":)")
And yeah, you shouldn't have any issues at stock. But if you buy some extra fans for it when/if you have heat issues; I'm sure you'll be good to roll.
And yeah, you shouldn't have any issues at stock. But if you buy some extra fans for it when/if you have heat issues; I'm sure you'll be good to roll.
Related ressources:
- ForumIs my computer doomed with instability for ever?
- ForumOk so I found my Thief II cdr's now what with Win2k Pro?
- ForumAm i right in thinking this psu is ok ?
- ForumBest deal on hard drive right now? update: * FOUND IT* 24hr deal
- ForumProblem with 2400 & p8p67 pro (no boot/shorting sound)
- ForumDead Laptop
- ForumThis PC right for me?
- ForumIf you found an exploit, what would you do?
- ForumIn desperate need of assistance, any help is much appreciated.
- ForumOverclocking Intel Pentium D 805 2.66 to 3.8
- ForumCPU fan clicking?
- ForumAm I doing this right? 965 BE Overclock to 3.8Ghz
- ForumMemory CAS LAT doesnt seem right.
- ForumMy first overclock is underway, am i on the right track?
- ForumSearching for the right mainboard....
- More resources
Read discussions in other Overclocking categories
!
