How does this look?

[computerwonder]

CPU manual voltage - 1.35
Dram Voltage - 1.5
Vccsa- 1.000v
Vccio- 1.10000
CPU PLL Voltage - 1.9

How does this look? I'm cooling with a antec khuler h20 620. Currently I'm at 3,3ghz will I be ok going straight to 4.5? Just out of interest could If I wanted to go to 4ghz would I just change the multiplayer and keep the same voltage?

 

[steddora]

What processor are you trying this on? An Ivy Bridge intel wouldn't like that voltage much.

 

[computerwonder]

Sorry must have missed the most important part xD it is a sandy i5 2500k

 

[steddora]

LOL IT's fine.

With that, I'd go here..

http://www.tomshardware.com/forum/265056-29-2600k-2500k-overclocking-guide

and

http://www.tomshardware.com/forum/274821-29-sandy-bridge-series-overclocking-cores-guide

As for my opinion, 1.35v is a bit high to start with. I'd try going for 4.2Ghz at 1.2v or so and see where you go with that. And for the most part, if you're stable at 4.5Ghz with 1.3v, theoretically you should be perfectly stable at 4Ghz with the same voltage.