Just finished my build ANd No display

Ay input would be appreciated. I just finished my build, and I am getting no display with my 5770. I am using a OCZ Modxstreme 700w power supply, and a gigabyte p55 ud3l motherboard. I checked power on motherboard pretty damn sure all connectors are present, and I have direct power going into my video card. At a standstill at this point. Any help would be great. Thanks.

5 answers Last reply
More about just finished build display
  1. Try taking the card out of the slot and reseeding it back in. I've had the same issue a few times and that usually does the trick to get it going.
  2. I will give that a ***, and keep you updated. I don't know what else it could be. The fan on the Video card is spinning. hmm. I shall try it.
  3. We have a sticky that was created to troubleshoot this exact type of problem. The first step in troubleshooting would be to perform EVERY step in this checklist:

  4. Ahh didnt see it at first. Thanks a ton. Goin throug it now
  5. Hye Thanks again guys. And thanks shortstuff_mt for referring me to the sticky. Didnt mean to ask such a redundant question. reserated my Video card, and switched up the RAM slots and bam I got video. Thanks so much for the help. Time to install the OS.
Ask a new question

Read More

Homebuilt Motherboards Build Systems Displays