paulpfsdirect

Distinguished
Feb 24, 2010
3
0
18,510
Hello,
I have just placed an order with a company and the graphics card is a 512mb ATI Radeon HD4200, could someone just confirm that it has a vga & dmi connection please? I am sure it has, and the salesman said it also has a HDMI connection, but I just need to make sure as I run two monitors? Cheers Paul
 

dougie_boy

Distinguished
Jun 15, 2006
596
0
18,990
it completely depends on the manufacturer of the card.

any more detail, low end card have less connections than the high end ones but you should see dvi at least.
 

aberchonbie

Distinguished
Aug 22, 2008
269
0
18,810
i didnt know they made discrete cards based on the Radeon hd4200.. wtheck? the hd 4200 is based off the 785 amd northbridge chipset..

something sounds fishy..
 

paulpfsdirect

Distinguished
Feb 24, 2010
3
0
18,510



Hi,

This is the spec:

AMD Phenom™ II X4 925 Quad Core Processor AM3 (2.80GHz, 8MB Cache)
Genuine Windows 7 Home Premium Edition - 64bit English
Stylish Mini-Tower Micro ATX Chassis with 300W PSU - Piano Black
ASUS M4A78LT-M Mainboard (DDR3), with integrated HDMI/DVI/VGA Graphics - MATX
4GB 1333MHz Dual Channel DDR3 SDRAM - (2x2GB)
500GB Serial ATA Hard Drive with 16MB Buffer
22x Dual Layer DVD Writer Super Format +R/-R/RW/RAM
512MB ATI Radeon HD4200 Integrated Graphics - Full HD Support (M4A785T-M)
7.1 High Definition onboard sound card - for 8 Channel Cinema sound

Does this help you?

Cheers for your reply earlier

Paul
 

jennyh

Splendid
What you need to know is what is on the motherboard, as it is integrated graphics.

http://forums.tweaktown.com/f19/asus-announce-m4a78l-m-m4a78lt-m-series-motherboards-36495/

As you can see from that, it has all the ports mentioned so you are fine.
 

paulpfsdirect

Distinguished
Feb 24, 2010
3
0
18,510



Hi Jenny,

Thank you for your response, it puts my mind at rest, as one of the tech guys from the same company said I needed to purchase an additional graphics card, but when I actually confirmed my order the guy said completed the opposite.

Sometimes you just need that little reassurance that it has what you are expecting, as you cant go and touch the machine before buying it? I have been searching online to find a photo, but it seems that as machines change from time to time, no-one likes putting a view of the rear of the machine?

Thanks again

Paul