CPU Fan for Push/Pull and additional case fans
Last response: in Overclocking
I'm looking into purchasing additional fans for my computer- I'm not particularly happy with the temps it's running at. (I prefer to buy from newegg)
I have a hyper 212 evo, and I want to get another fan for a Push/Pull setup, and I need a recommendation on what fan to get.; I also have no idea how to get it setup, so if somebody could link to a good tutorial that would be great.
I have a Corsair Carbide 400r and and Asrock Z77 extreme 3 motherboard; I haven't added any fans into my case, so I think I have room for two 120mm fans on both sides, as well as another two on the top; my motherboard, however, only has two more ports for case fans, so am I only able to set up two more case fans, or is there a way I could install more? I need recommendations for good case fans as well.
Thanks for the help!
I have a hyper 212 evo, and I want to get another fan for a Push/Pull setup, and I need a recommendation on what fan to get.; I also have no idea how to get it setup, so if somebody could link to a good tutorial that would be great.
I have a Corsair Carbide 400r and and Asrock Z77 extreme 3 motherboard; I haven't added any fans into my case, so I think I have room for two 120mm fans on both sides, as well as another two on the top; my motherboard, however, only has two more ports for case fans, so am I only able to set up two more case fans, or is there a way I could install more? I need recommendations for good case fans as well.
Thanks for the help!
More about : cpu fan push pull additional case fans
Best solution
Well you can buy Corsair fans, specifically the SP120 Fans twin pack: http://www.newegg.com/Product/Product.aspx?Item=N82E168... (They work great in heatsinks and radiators) and if you don't want to loose the 2 x 3Pin fan connectors in the motherboard you can buy this: http://www.newegg.com/Product/Product.aspx?Item=N82E168... It accepts 4 Pin and 3 Pin fans.
And for the other fans probably the AF120 also from corsair (Better for exhaust fans and non-restrictive intakes) But you don't need to fill all the fan mounts. If you have more intake CFM than exahust you achieve a positive air pressure it'll help to reduce dust in the case and the temps.
So you can add another intake in the side panel for the GPU and a top exhaust.
And for the other fans probably the AF120 also from corsair (Better for exhaust fans and non-restrictive intakes) But you don't need to fill all the fan mounts. If you have more intake CFM than exahust you achieve a positive air pressure it'll help to reduce dust in the case and the temps.
So you can add another intake in the side panel for the GPU and a top exhaust.
Related ressources:
- ForumBest fans for a Push-Pull Config. on H100?
- ForumDo you need an exhaust fan when you have a push/pull HSF?
- ForumPush+Pull or Push+Push Dual Fans on Heat Sink
- ForumDoes Push/Pull System in CPU heatsink work?
- ForumPush/Pull H80i Cable Help? ( Fan Controller/ CPU Fan Header)
- ForumWill adding top exhaust fan interfere with the CPU push/pull method?
- ForumAdditional fan on COOLER MASTER Hyper 212 EVO
- ForumExpert advice needed: Should I change to push/pull CPU heatsink
- ForumCorsair H100 Push/Pull , What fans do I need?
- ForumConnecting additional cpu cooling fans
- ForumPush/Pull with Cooler Master Hyper 212+ w/Noctua?
- ForumCorsair H50 Push/Pull Fans and Pump Connection
- ForumSetting up a push/pull configuration with a Corsair H60
- ForumPush/Pull Fan Setup
- ForumShould I connect all my case fans to a PWM slot?
- ForumProper H60 and Case fans set up help!
- ForumCPU OVERHEATING TOO MUCH!
- ForumCan Someone Help me Adjust my Fan Speeds In BIOS?
- ForumTEC/Peltier CPU Water Cooling
- ForumOverclocking CPU
- More resources
Read discussions in other Overclocking categories
!
