Sign in with
Sign up | Sign in
Your question

Trying to everclock my C2D E7500

Last response: in Overclocking
Share
January 29, 2013 2:41:28 AM

Hello,
I decided to overclock my E7500 and i need some help. So i read the overclocking guide and i know how to do it in the bios but, the only problem is that i don't know when to change the voltage. I am planning to overclock it from its stock speed which is 2.93ghz to 3.8 or 4.1ghz if possible. I also bought a cpu cooler (Coolermaster hyper tx3 evo) and a 120mm case fan so increasing the voltage won't be a problem for the rise of temperature. Oh, forgot to mention that my psu is 750watt. So lets say i want to overclock it to 3.2ghz first what should i set the voltage at? (my stock voltage is 1.100-1.288 V).

More about : everclock c2d e7500

January 29, 2013 9:23:45 PM

Just an over clock to 3.2ghz shouldn't require an increase in voltage. Your best bet is to over clock by 100mhz increments until it becomes unstable that you want to increase the voltage by .1 volts until it becomes stable again but try not to go past 1.4volts.
January 30, 2013 3:57:41 AM

shafe88 said:
Just an over clock to 3.2ghz shouldn't require an increase in voltage. Your best bet is to over clock by 100mhz increments until it becomes unstable that you want to increase the voltage by .1 volts until it becomes stable again but try not to go past 1.4volts.

I will give it a try, thank you.
January 30, 2013 6:04:52 AM

I Overclocked my E4300 from 1.8Ghz to 3Ghz without change in voltage. but still i am having a good amount of space for more with my CM TXT3 EVO cooler.
!