Sign in with
Sign up | Sign in
Your question

I5 2500k P67a UD3 B3 overclock 4.0-4.2 plz HElp for beginner.

Last response: in Overclocking
Share
February 5, 2013 7:49:48 PM

I just increase the cpu multiplier to 40 and use extreme memory profile to profile1 all is on auto i dont touch anything else only disable the boost, my vcore set automatic to 1.305. All i want to do is a stable oc for everyday usage gaming and producing music to 4.0-4.2.Without harm ofcourse my pc. Any help will be appreciated!
a b à CPUs
February 5, 2013 8:34:34 PM

soulfly1269 said:
I just increase the cpu multiplier to 40 and use extreme memory profile to profile1 all is on auto i dont touch anything else only disable the boost, my vcore set automatic to 1.305. All i want to do is a stable oc for everyday usage gaming and producing music to 4.0-4.2.Without harm ofcourse my pc. Any help will be appreciated!


Any picture of the Bios ? You should be able to set the voltage manually in the same tab. 1.5 will be good i think. If it's not increase it a bit.


- The Brownie
m
0
l
February 5, 2013 8:58:56 PM

Don't dare touch that vCore to 1.5v. 1.25 is more than enough for 4-4.2. Heck I have mine running at 1.25 @4.4 with 3570K. Just go to the settings and make sure you have that as your settings and for memory increase the voltage to 1.5 and change the speed to 1600 if you have it and save and exit.

So CPU at 4.2 with 1.25 or less
Memorry XMP, Profile 1, 1600MHz @ 1.5. Change the timing to 9-9-9-27 for both A and B channel. Save and exit. Voila!
m
0
l
Related resources
February 5, 2013 9:12:13 PM

Bromeh said:
Any picture of the Bios ? You should be able to set the voltage manually in the same tab. 1.5 will be good i think. If it's not increase it a bit.


- The Brownie

1.5 vcore its to much i think
for 4 ghz OC
m
0
l
a b à CPUs
February 5, 2013 9:13:59 PM

soulfly1269 said:
1.5 vcore its to much i think
for 4 ghz OC


My 3770k needs 1.6 for 4.2Ghz :p 


- The Brownie
m
0
l
February 5, 2013 9:18:34 PM

hero1 said:
Don't dare touch that vCore to 1.5v. 1.25 is more than enough for 4-4.2. Heck I have mine running at 1.25 @4.4 with 3570K. Just go to the settings and make sure you have that as your settings and for memory increase the voltage to 1.5 and change the speed to 1600 if you have it and save and exit.

So CPU at 4.2 with 1.25 or less
Memorry XMP, Profile 1, 1600MHz @ 1.5. Change the timing to 9-9-9-27 for both A and B channel. Save and exit. Voila!

When i reduce vcore to 1.25 manual i have vdroop!!
1.3 vcore its safe?
m
0
l
a b à CPUs
February 5, 2013 9:23:34 PM

soulfly1269 said:
When i reduce vcore to 1.25 manual i have vdroop!!
1.3 vcore its safe?


Ooopps i meant 1.16 for 4.2Ghz

The max safe is 1.50 but you can clearly use it at 1.3GHz as long as your temps are good


- The Brownie
m
0
l
February 5, 2013 9:24:05 PM

hero1 said:
Don't dare touch that vCore to 1.5v. 1.25 is more than enough for 4-4.2. Heck I have mine running at 1.25 @4.4 with 3570K. Just go to the settings and make sure you have that as your settings and for memory increase the voltage to 1.5 and change the speed to 1600 if you have it and save and exit.

So CPU at 4.2 with 1.25 or less
Memorry XMP, Profile 1, 1600MHz @ 1.5. Change the timing to 9-9-9-27 for both A and B channel. Save and exit. Voila!


Here my settings now all in auto as it is only disabled turbo boost and xtreme mrmoty profile to profile 1
m
0
l
a b à CPUs
February 5, 2013 9:26:51 PM

soulfly1269 said:

Here my settings now all in auto as it is only disabled turbo boost and xtreme mrmoty profile to profile 1


Put the BCLK to 100 exactly, this is "safer".


- The Brownie
m
0
l
February 5, 2013 9:31:03 PM

Bromeh said:
Put the BCLK to 100 exactly, this is "safer".


- The Brownie

I dont touch the bclk before.
bclk clock control is disabled in bios.
m
0
l
February 5, 2013 9:32:56 PM

before it was 99.6 i think not exactly 100!
m
0
l
February 5, 2013 9:34:07 PM

before overclockink i mean!
m
0
l
!